[Solved] Possible to Disable Auto Switching to Tasks Tab?
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
[Solved] Possible to Disable Auto Switching to Tasks Tab?
Is it possible to keep FreeCAD from automatically switching to the [Tasks] tab when switching workbenches?
Last edited by Kunda1 on Sun Jul 14, 2019 2:47 pm, edited 1 time in total.
Re: Possible to Disable Auto Switching to Tasks Tab?
Here it stays on the Model tab (if this one is active) when switching between workbenches...
What is your version ? Could you try to reset your custom settings ?
What is your version ? Could you try to reset your custom settings ?
Re: Possible to Disable Auto Switching to Tasks Tab?
I reset my custom settings and that didn't help. The version is 0.18.1 under Ubuntu 18.04 LTS
Re: Possible to Disable Auto Switching to Tasks Tab?
Perhaps the reason for this behaviour is similar to what I have seen on two different Mac systems: Some events seem to double fire. DeepSOIC has worked on this, so you may try a current 0.19 version.
If the issue persists, try different Mouse Models. Please report back with your full FreeCAD infos included.
If the issue persists, try different Mouse Models. Please report back with your full FreeCAD infos included.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Possible to Disable Auto Switching to Tasks Tab?
Point 4 following the IMPORTANT link on the top of the page.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Possible to Disable Auto Switching to Tasks Tab?
Ah...
OS: Ubuntu 18.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.1.
Build type: Release
Python version: 3.6.7
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
OS: Ubuntu 18.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.1.
Build type: Release
Python version: 3.6.7
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Re: Possible to Disable Auto Switching to Tasks Tab?
So it remains to reproduce this in a current 0.19 version.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Possible to Disable Auto Switching to Tasks Tab?
...And try with another Mouse Model as you also suggested above.
Re: Possible to Disable Auto Switching to Tasks Tab?
I did try another mouse mode last night. I just didn't want to reply back with that until after I tried the .19 pre-release. WIth a different mouse mode, I still have the same issue.
I may want to clarify something. The "switching to the tasks tab" seems to be only when I switch to the "Parts Design" workbench. I haven't tried all of the work benches but I will do that this weekend.