Hello,
I'm quite new to FreeCad...
I'm trying to do a plane (the last I have done in the project)
I have done it but I think there is a better solution to do it...
I want it to be like the last in my project, but I don't want to says translation -55mm. I want to say that the center of the circle is part of the plane.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16117 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: dbb4cc6415bac848a294f03b80f65e888d531742
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/France (fr_FR)
If you can help, thank you.
Best regards,
Plane creation
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Plane creation
- Attachments
-
- plane.png (99.25 KiB) Viewed 692 times
-
- Haut_sv2.FCStd
- (28.17 KiB) Downloaded 26 times
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: Plane creation
HI,
you can attach the datum plane concentric to the circle and offset by 90 deg ROLL
i used the edge , but using the sketch lines would be safer..
you can attach the datum plane concentric to the circle and offset by 90 deg ROLL
i used the edge , but using the sketch lines would be safer..
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
- papyblaise
- Veteran
- Posts: 8002
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Plane creation
Hello
Do a Datum line as axe for the sphère
facing one half circle on the face of suport
do rotate of half circle around Datum ligne 180°
Do Miror for the other side
don't forget to do Refine sometime totime
Do a Datum line as axe for the sphère
facing one half circle on the face of suport
do rotate of half circle around Datum ligne 180°
Do Miror for the other side
don't forget to do Refine sometime totime
- Attachments
-
- pion-charnière.FCStd
- (43.87 KiB) Downloaded 28 times
-
- pion-charnière.PNG (35.08 KiB) Viewed 650 times
Re: Plane creation
Hello,HarryGeier wrote: ↑Fri Aug 09, 2019 6:33 am HI,
you can attach the datum plane concentric to the circle and offset by 90 deg ROLL
2019-08-09 08_30_36-FreeCAD 0.18.png
i used the edge , but using the sketch lines would be safer..
Thank you very much.
Best regards
Re: Plane creation
Hi,papyblaise wrote: ↑Fri Aug 09, 2019 8:49 am Hello
Do a Datum line as axe for the sphère
facing one half circle on the face of suport
do rotate of half circle around Datum ligne 180°
Do Miror for the other side
don't forget to do Refine sometime totime
Thank you.
Best regards,