Arch: window/door in a Cut does not make a hole

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
User avatar
Roy_043
Veteran
Posts: 8538
Joined: Thu Dec 27, 2018 12:28 pm

Re: Arch: window/door in a Cut does not make a hole

Post by Roy_043 »

vocx wrote: ↑Thu Sep 12, 2019 4:11 pm Mixing in Part Workbench operations is going to mess your design.
In the end your advice is contradicted by the BIM WB which has toolbars giving access to Part operations. No wonder the OP is left confused.
Top
vocx
Veteran
Posts: 5197
Joined: Thu Oct 18, 2018 9:18 pm

Re: Arch: window/door in a Cut does not make a hole

Post by vocx »

Roy_043 wrote: ↑Sat Sep 14, 2019 9:36 am In the end your advice is contradicted by the BIM WB which has toolbars giving access to Part operations. No wonder the OP is left confused.
I already explained this.
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Top
Post Reply

Return to “Help on using FreeCAD”