Can't export a model
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Can't export a model
Before writing a feature request: are there more of these known?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't export a model
I can't think of any (though I'm not claiming that they don'r exist).
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Can't export a model
shoudent the startup settings takel this
as 0,0 is not a good mesh
atleast the lowest mashining in units shoudt be set
as metric 0,01 imperial 0,001
and a good filesize is 0,1in metric and 0,01 in imperial
as 0,0 is not a good mesh
atleast the lowest mashining in units shoudt be set
as metric 0,01 imperial 0,001
and a good filesize is 0,1in metric and 0,01 in imperial
Re: Can't export a model
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't export a model
I'm not sure with these absolute values. As you say, they depend on the machine, but may also depend on the absolute size of the model. A tiny model may be be resized later.pl7i92LCNC wrote: ↑Mon Oct 21, 2019 3:30 pm atleast the lowest mashining in units shoudt be set
as metric 0,01 imperial 0,001
and a good filesize is 0,1in metric and 0,01 in imperial
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't export a model
Guys, I'm looking at this. Easy to fix but ... what should be the minimum value set to ? 1 µm ? 1 nm ?
Re: Can't export a model
Planks length
Smallest step I can move something in Sketcher is 4 nm.
Smallest step I can move something in Sketcher is 4 nm.
Re: Can't export a model
PR submitted
Set to 10nm
Set to 10nm