[solved] vase rotation extrusion helix and profile

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
User avatar
pl7i92LCNC
Posts: 208
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: vase rotation extrusion helix and profile

Post by pl7i92LCNC »

so this is the nearest i coudt get on loft
i cand make it smooth it is ruled it fails on smoothness (rule=false)
there is somthing wrong in the sketch flow or the rotation
more inspection needed
vase_ruled.jpg
vase_ruled.jpg (24.79 KiB) Viewed 1469 times
the Filesize on 16 sketches has jumped over 2MB as from 20kb with 6 sketches
has someoen a logical reason on this
can i clear the file to a standard
chrisb
Veteran
Posts: 53932
Joined: Tue Mar 17, 2015 9:14 am

Re: vase rotation extrusion helix and profile

Post by chrisb »

It seems as if you have simply enlarged thebottom sketch, which results in different radii for the outer skeleton ribs. the image posted above did not have this, only the distance between the ribs varied.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
pl7i92LCNC
Posts: 208
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: vase rotation extrusion helix and profile

Post by pl7i92LCNC »

i teard it down now
800kb
WHY cand i select the next sketch it fails on generate the loft
it w
vas_2.FCStd
(799.79 KiB) Downloaded 88 times
orkes wit regular (straigt but not on smooth
User avatar
pl7i92LCNC
Posts: 208
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: vase rotation extrusion helix and profile

Post by pl7i92LCNC »

and the FINAL
what i did start all over one Sketch profile one contour
i did in DRAFT clone only the BASE 14 times ((Clones only from Base Sketch)) and moved eatch clone up to ponts where the contour changes
then i scaled eatch clone to the contour shape
then i rotated eatch clone acording to the Height of the clone i wanted 90deg in totel at 60mm geigt so factor 1,5 height to rotation

now in PART make a loft from the clones starting base and adding them all failed managed to go until last 3 to first loft
then i did the rest 3 into another loft
and final fused them together
Wollah a nearly perfect contour shaped VASE took in total from start 10h but as you know how to do it it is 20minutes max
Filesize now 300kb
vas_neu.FCStd
(253.05 KiB) Downloaded 62 times
vase_neu.jpg
vase_neu.jpg (21.07 KiB) Viewed 1444 times
User avatar
papyblaise
Veteran
Posts: 7872
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: [solved] vase rotation extrusion helix and profile

Post by papyblaise »

As you know a vase is empty :?: Are you able to shell yours :?:
User avatar
Vincent B
Veteran
Posts: 4713
Joined: Sun Apr 05, 2015 9:02 am
Location: La Rochelle, France

Re: [solved] vase rotation extrusion helix and profile

Post by Vincent B »

Here, fully parameterized, and be a shell. ;)
Loft run well only a degree 3.
Attachments
vase3.FCStd
(56.35 KiB) Downloaded 56 times
Capture.PNG
Capture.PNG (215.36 KiB) Viewed 1406 times
chrisb
Veteran
Posts: 53932
Joined: Tue Mar 17, 2015 9:14 am

Re: [solved] vase rotation extrusion helix and profile

Post by chrisb »

Impressive solutions! (But I hope I will not have any of these vases in my home, but that's a matter of taste :lol: )
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply