so this is the nearest i coudt get on loft
i cand make it smooth it is ruled it fails on smoothness (rule=false)
there is somthing wrong in the sketch flow or the rotation
more inspection needed
the Filesize on 16 sketches has jumped over 2MB as from 20kb with 6 sketches
has someoen a logical reason on this
can i clear the file to a standard
[solved] vase rotation extrusion helix and profile
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: vase rotation extrusion helix and profile
It seems as if you have simply enlarged thebottom sketch, which results in different radii for the outer skeleton ribs. the image posted above did not have this, only the distance between the ribs varied.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: vase rotation extrusion helix and profile
i teard it down now
800kb
WHY cand i select the next sketch it fails on generate the loft
it w orkes wit regular (straigt but not on smooth
800kb
WHY cand i select the next sketch it fails on generate the loft
it w orkes wit regular (straigt but not on smooth
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: vase rotation extrusion helix and profile
and the FINAL
what i did start all over one Sketch profile one contour
i did in DRAFT clone only the BASE 14 times ((Clones only from Base Sketch)) and moved eatch clone up to ponts where the contour changes
then i scaled eatch clone to the contour shape
then i rotated eatch clone acording to the Height of the clone i wanted 90deg in totel at 60mm geigt so factor 1,5 height to rotation
now in PART make a loft from the clones starting base and adding them all failed managed to go until last 3 to first loft
then i did the rest 3 into another loft
and final fused them together
Wollah a nearly perfect contour shaped VASE took in total from start 10h but as you know how to do it it is 20minutes max
Filesize now 300kb
what i did start all over one Sketch profile one contour
i did in DRAFT clone only the BASE 14 times ((Clones only from Base Sketch)) and moved eatch clone up to ponts where the contour changes
then i scaled eatch clone to the contour shape
then i rotated eatch clone acording to the Height of the clone i wanted 90deg in totel at 60mm geigt so factor 1,5 height to rotation
now in PART make a loft from the clones starting base and adding them all failed managed to go until last 3 to first loft
then i did the rest 3 into another loft
and final fused them together
Wollah a nearly perfect contour shaped VASE took in total from start 10h but as you know how to do it it is 20minutes max
Filesize now 300kb
- papyblaise
- Veteran
- Posts: 7872
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: [solved] vase rotation extrusion helix and profile
As you know a vase is empty Are you able to shell yours
Re: [solved] vase rotation extrusion helix and profile
Here, fully parameterized, and be a shell.
Loft run well only a degree 3.
Loft run well only a degree 3.
- Attachments
-
- vase3.FCStd
- (56.35 KiB) Downloaded 56 times
-
- Capture.PNG (215.36 KiB) Viewed 1407 times
Re: [solved] vase rotation extrusion helix and profile
Impressive solutions! (But I hope I will not have any of these vases in my home, but that's a matter of taste )
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.