Dear All,
Hi, after using the Additive Loft feature in the part design workbench in freeCAD, I have problem with the lighting as shown in the picture below. I am unable to see the highlighted face of my model when I hover my mouse cursor over them.
please help
Thanks.
Problem with lighting when using AdditiveLoft
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Problem with lighting when using AdditiveLoft
Topic moved from Developer section
Re: Problem with lighting when using AdditiveLoft
Hi and welcome to the forum!
Make sure you have checked Preferences->Display->Colors->Enable preselection highlighting. If the problem persists add your FreeCAD info as described above following the IMPORTANT link.
Make sure you have checked Preferences->Display->Colors->Enable preselection highlighting. If the problem persists add your FreeCAD info as described above following the IMPORTANT link.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.