Knob Tutorial - Chosing the No. of detents to make

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
SupDoc
Posts: 55
Joined: Sun Oct 27, 2019 12:05 am

Knob Tutorial - Chosing the No. of detents to make

Postby SupDoc » Sat Nov 02, 2019 9:57 pm

v0.18 Widows 10 64-bit.
I've done everything perfectly, in agreement with the tutorial. Here he creates two helping lines, starting as crossed. He touches the two lower red points on the ends of the line and the center point, as he does they each turn green, Then he grabs the right one with the pointer and pulls it to the center line when he does, the lines appear to snap to the center line, When I do this and use the angle tool to constrain the angle between to 360/24* = 15*, the two lines blow apart, obviously they didn't snap in his case they stay together and show a dimension of 15*.
If I can't get the lines to snap to the center line I will not be able to finish the tutorial. Can somebody please provide some help here?
Attachments
KnobDetentAngle.PNG
KnobDetentAngle.PNG (117.88 KiB) Viewed 218 times
chrisb
Posts: 19589
Joined: Tue Mar 17, 2015 9:14 am

Re: Knob Tutorial - Chosing the No. of detents to make

Postby chrisb » Sat Nov 02, 2019 10:10 pm

If you talk about a tutorial you should always give a link, if it's a video tutorial give the time position as well.

Your issue seems to be a missing coincident constraint. It is not enough to get somehow through a tuorial, you may have to go back and try to understand the reason why all these constraints are used and how they work. Video tutorials are not always the best choice, you may have a look at the Tutorials in the wiki. If you have learned the very basics about sketching, then this Sketcher tutorial may give you more explanations.
SupDoc
Posts: 55
Joined: Sun Oct 27, 2019 12:05 am

Re: Knob Tutorial - Chosing the No. of detents to make

Postby SupDoc » Sat Nov 02, 2019 10:30 pm

Where is it? I clicked on the hyperlink and I got your starting remarks about the sketcher tutorial and lots of comments, but I couldn't find the Pdf you are talking about.
SupDoc
Posts: 55
Joined: Sun Oct 27, 2019 12:05 am

Re: Knob Tutorial - Chosing the No. of detents to make

Postby SupDoc » Sat Nov 02, 2019 10:36 pm

Here is the tutorial, hope that gets someone to respond with some useful advise: https://www.youtube.com/watch?v=H9qPMf3pxxo
chrisb
Posts: 19589
Joined: Tue Mar 17, 2015 9:14 am

Re: Knob Tutorial - Chosing the No. of detents to make

Postby chrisb » Sat Nov 02, 2019 10:41 pm

SupDoc wrote:
Sat Nov 02, 2019 10:30 pm
Where is it? I clicked on the hyperlink and I got your starting remarks about the sketcher tutorial and lots of comments, but I couldn't find the Pdf you are talking about.
Sorry I gave you the link to the discussion about that tutorial. The link is at the end of the first post, and here it is again: https://owncloud.gwdg.de/index.php/s/HS ... I/download. Furthermore I have corrected the post above.
chrisb
Posts: 19589
Joined: Tue Mar 17, 2015 9:14 am

Re: Knob Tutorial - Chosing the No. of detents to make

Postby chrisb » Sat Nov 02, 2019 10:45 pm

SupDoc wrote:
Sat Nov 02, 2019 10:36 pm
Here is the tutorial, hope that gets someone to respond with some useful advise: https://www.youtube.com/watch?v=H9qPMf3pxxo
chrisb wrote:
Sat Nov 02, 2019 10:10 pm
if it's a video tutorial give the time position as well.
Roy_043
Posts: 540
Joined: Thu Dec 27, 2018 12:28 pm

Re: Knob Tutorial - Chosing the No. of detents to make

Postby Roy_043 » Sun Nov 03, 2019 10:19 am

Position: 15:30.

A coincident constraint (Sketcher ConstrainCoincident) is applied ("I put these two points on the origin"). In the tutorial the keyboard shortcut "C" is probably used.
User avatar
HarryGeier
Posts: 1165
Joined: Mon Jul 10, 2017 12:36 pm
Location: Hof Germany

Re: Knob Tutorial - Chosing the No. of detents to make

Postby HarryGeier » Wed Nov 06, 2019 9:32 am

Roy, i look it up...i made that tutorial. I guess yu have some setting different which causes the behaviour.
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
User avatar
HarryGeier
Posts: 1165
Joined: Mon Jul 10, 2017 12:36 pm
Location: Hof Germany

Re: Knob Tutorial - Chosing the No. of detents to make

Postby HarryGeier » Wed Nov 06, 2019 9:37 am

I looked it up. There is a short piece of the video missing ( flaw in the cutting program ) .
Both points and the origin point are to be coincident.

What may have happend in your case : One of your lines snaps to vertical constraint when you put it on screen.
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/