Icons and Tool Menus

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
ehendrix
Posts: 4
Joined: Mon Nov 25, 2019 1:39 am

Icons and Tool Menus

Post by ehendrix »

Hello,

Going through the video tutorials I see there is no longer a Draft tool selection with endpoint selections? Are these moved somewhere else or is there some other way of assembling to endpoints?

Am I missing something?

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.4 (GitTag)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 980bf9060e28555fecd9e3462f68ca74007b70f8
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
:oops:

Confused,
Eric
Top
User avatar
Willem
Veteran
Posts: 1854
Joined: Fri Aug 12, 2016 3:27 pm
Location: Lisse, The Netherlands

Re: Icons and Tool Menus

Post by Willem »

Move the Toolbars, perhaps 2 toolbars are partly above each other
Top
vocx
Veteran
Posts: 5197
Joined: Thu Oct 18, 2018 9:18 pm

Re: Icons and Tool Menus

Post by vocx »

ehendrix wrote: ↑Wed Nov 27, 2019 8:30 pm Hello,

Going through the video tutorials I see there is no longer a Draft tool selection with endpoint selections? ...
?

Draft Endpoint
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Top
User avatar
wandererfan
Veteran
Posts: 6320
Joined: Tue Nov 06, 2012 5:42 pm
Contact:
Contact wandererfan

Re: Icons and Tool Menus

Post by wandererfan »

ehendrix wrote: ↑Wed Nov 27, 2019 8:30 pm Going through the video tutorials I see there is no longer a Draft tool selection with endpoint selections? Are these moved somewhere else or is there some other way of assembling to endpoints?
The snap tool bar might be turned off?
DraftSnapBarPreference.png
DraftSnapBarPreference.png (96.73 KiB) Viewed 301 times
Top
User avatar
bejant
Veteran
Posts: 6075
Joined: Thu Jul 11, 2013 3:06 pm

Re: Icons and Tool Menus

Post by bejant »

(or in the Draft WB use the pull-down menu to navigate to View > Toolbars and make sure Draft Snap is ticked to On)
Top
Post Reply

Return to “Help on using FreeCAD”