0.19 Sketcher Problems
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
0.19 Sketcher Problems
Hi,
in current 0.19pre i see 2 Problems with Sketcher, one minor, another bigger :
1: When in Sketcher, features from the object tree can sometimes not be switched invisible or vice versa. I did not find out when exactly.
2: When trying to use a named constraint , in 0.18 after typing C into the box ( which comes up after = sign keying ), brings up "constraints.blabla" or a list of constraints of the current sketch. This autocompletion seems totally missing in 0.19 . Typing constraints.blabla will bring the value but this is very very tedious.
Did i miss something ifor 0.19 Sketcher or are the real regerssions. Can someone else verify these observations ?
OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18760 (Git)
Build type: Release
Branch: master
Hash: ef73ab5f3a330d3c44138f23290f8c9f7a334caf
Python version: 3.7.3
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
Harry
in current 0.19pre i see 2 Problems with Sketcher, one minor, another bigger :
1: When in Sketcher, features from the object tree can sometimes not be switched invisible or vice versa. I did not find out when exactly.
2: When trying to use a named constraint , in 0.18 after typing C into the box ( which comes up after = sign keying ), brings up "constraints.blabla" or a list of constraints of the current sketch. This autocompletion seems totally missing in 0.19 . Typing constraints.blabla will bring the value but this is very very tedious.
Did i miss something ifor 0.19 Sketcher or are the real regerssions. Can someone else verify these observations ?
OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18760 (Git)
Build type: Release
Branch: master
Hash: ef73ab5f3a330d3c44138f23290f8c9f7a334caf
Python version: 3.7.3
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
Harry
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
Re: 0.19 Sketcher Problems
Hi Harry
Will try to reproduce and come back.HarryGeier wrote: ↑Mon Dec 02, 2019 10:30 am 1: When in Sketcher, features from the object tree can sometimes not be switched invisible or vice versa. I did not find out when exactly.
This at least the 4th topic about that. The function has been lost during the big merge. Though the expression field now supports much more attributes. This isn't really a regression but a ... compromise. However I don't know if there is current plan to improve this so named constraints are available in autocompletion (as it was before). @chrisb may have more info.2: When trying to use a named constraint , in 0.18 after typing C into the box ( which comes up after = sign keying ), brings up "constraints.blabla" or a list of constraints of the current sketch. This autocompletion seems totally missing in 0.19 . Typing constraints.blabla will bring the value but this is very very tedious.
Re: 0.19 Sketcher Problems
I haven't really more information, but realthunder is aware of this issue. If you are looking for details: it was not exactly the Big Merge, it was shortly after, when realthunder's new expression engine was committed. I will see if I find the post.
Concerning Harry's first point: I have seen this as well, not only in Sketcher, but I cannot say either when or how it occurs.
Concerning Harry's first point: I have seen this as well, not only in Sketcher, but I cannot say either when or how it occurs.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0.19 Sketcher Problems
This is the discussion with realthunder: https://forum.freecadweb.org/viewtopic. ... 07#p331207.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: 0.19 Sketcher Problems
Thanks , i will wait and follow the discussion.
I tried to find something on that but did not find...thus i decided to finally post it here.
Now i know what to follow..
Harry
I tried to find something on that but did not find...thus i decided to finally post it here.
Now i know what to follow..
Harry
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
Re: 0.19 Sketcher Problems
Though the problem #1 you described seems to be confirmed while not well identified. Could be good to change the thread title to match this specific issue so we can merge here information when we find some.
Re: 0.19 Sketcher Problems
ezzieyguywuf is currently working on expressions and hopefully he will improve the autocompletion situation.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: 0.19 Sketcher Problems
Any news on this ?
For me , working without this is annoying and tedious. Keeping a written list of dozens of constraint names makes no sense... and is somewhat pointing back into the last decade of Software usability
Thus,i am stuck to 0.18 for my own projects as well as for videos. I cannot imagine telling someone...now write down the name of the constraint....
Harry
I
For me , working without this is annoying and tedious. Keeping a written list of dozens of constraint names makes no sense... and is somewhat pointing back into the last decade of Software usability
Thus,i am stuck to 0.18 for my own projects as well as for videos. I cannot imagine telling someone...now write down the name of the constraint....
Harry
I
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
Re: 0.19 Sketcher Problems
Hi Harry, there is a great PR from @realthunder pending on that. I'll find a link.
EDIT : https://forum.freecadweb.org/viewtopic. ... 12#p369650
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: 0.19 Sketcher Problems
Thanks,
i did not find that one myself.. looks promising...
i did not find that one myself.. looks promising...
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/