Problems with BIM modeling tutorial

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
wima
Posts: 19
Joined: Sat Jan 11, 2020 9:22 am

Problems with BIM modeling tutorial

Postby wima » Sun Jan 26, 2020 11:50 am

Hi
I'm trying to do the steps of this tutorial: https://www.freecadweb.org/wiki/Manual:BIM_modeling

In the step, where I have to move the door sketch, I have a problem:
001.jpg
001.jpg (19.24 KiB) Viewed 231 times
When I change the position of the sketch, the dor will move, but the hole is still on the old place. What I'm making wrong?
Thank you
Attachments
Haus.FCStd
(28.86 KiB) Downloaded 13 times
Top
vocx
Posts: 5206
Joined: Thu Oct 18, 2018 9:18 pm

Re: Problems with BIM modeling tutorial

Postby vocx » Mon Jan 27, 2020 1:06 am

wima wrote: ↑
Sun Jan 26, 2020 11:50 am
...
When I change the position of the sketch, the dor will move, but the hole is still on the old place. ...
Thank you
Important information

If I'm not mistaken, this is a small recomputation bug. You just need to select the model in the tree view, then right click, "Mark for recompute", and then recompute the model by pressing F5 or from the Edit menu (Std_Refresh).
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Top
wima
Posts: 19
Joined: Sat Jan 11, 2020 9:22 am

Re: Problems with BIM modeling tutorial

Postby wima » Mon Jan 27, 2020 4:47 pm

Thank you
Top
Post Reply
Powered by phpBB® Forum Software © phpBB Limited