Hi,
I'm trying give my fusion part a flat bottom, by cutting away the "excess".
However for some reason it just won't do it. It is performing a cut, but nothing is taken away.
I used to work before in the same file, but now it doesn't. Pls someone take a look.
Thanks!
Can't Cut this :-(
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Can't Cut this :-(
- Attachments
-
- cutme.FCStd
- (654.94 KiB) Downloaded 22 times
Re: Can't Cut this :-(
I switched to part WB and did a cut...with Fusion and Bottom selected.
- Attachments
-
- cutme-1.FCStd
- (853.38 KiB) Downloaded 20 times
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Can't Cut this :-(
Which version are you using?
I can't do it in 0.18, but in 0.19 it seems to work.
I can't do it in 0.18, but in 0.19 it seems to work.
Code: Select all
OS: Chakra
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16146 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 0.18.4)
Hash: 980bf9060e28555fecd9e3462f68ca74007b70f8
Python version: 3.6.7
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Re: Can't Cut this :-(
OS: Ubuntu 19.10 (XFCE/ubuntustudio)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.7.5
Qt version: 5.12.4
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/United States (en_US)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.7.5
Qt version: 5.12.4
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/United States (en_US)
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."