Thanks for getting back to me.
Simpler example attached.
In the screenshot below, I get an error when I try to apply a fillet to the two selected arcs.
Techdraw dimension between line and arc tangent
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Techdraw dimension between line and arc tangent
- Attachments
-
- example.FCStd
- (55.15 KiB) Downloaded 12 times
Re: Techdraw dimension between line and arc tangent
The problem is the default radius of 1mm. It is too big for the adjoining faces. If you reduce it things should work just fine.
- Attachments
-
- example_Fillet.FCStd
- (72.5 KiB) Downloaded 11 times
Re: Techdraw dimension between line and arc tangent
Perfect! Thank you so much!
"Still on the freecad learning path...."
"Still on the freecad learning path...."