System unit Error
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 3
- Joined: Tue Jul 14, 2020 9:30 am
System unit Error
I have installed Freecad 0.18 from the ubuntu software center. Under unit settings, I have selected standard unit option but when I select revolved sketch It showed units in mm^2. I didn't see the degree unit.
- Attachments
-
- Unit
- unit.png (18.72 KiB) Viewed 538 times
Re: System unit Error
Hi, Welcome.
Please give a try to 0.19 version. This is as stable and much more featured than 0.18. It also has a lot of bugfixes.
Please give a try to 0.19 version. This is as stable and much more featured than 0.18. It also has a lot of bugfixes.
-
- Posts: 3
- Joined: Tue Jul 14, 2020 9:30 am
Re: System unit Error
Thanks for your help. Yesterday I faced qt5 and pyside2 related error. But with 0.19 everything is fine now.
Re: System unit Error
You can also just write "deg", I think.
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
-
- Posts: 3
- Joined: Tue Jul 14, 2020 9:30 am
Re: System unit Error
I did it but It showed again mm^2 rather than deg.