same for me:
0.6.5
OS: openSUSE Tumbleweed (KDE//usr/share/xsessions/plasma5)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.Unknown
Build type: Release
Python version: 3.8.8
Qt version: 5.15.2
Coin version: 3.1.3
OCC version: 7.5.1
Locale: English/United Kingdom (en_GB)
[Solved] Many occurrences of error message '(call stack is not deep enough)'
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Many occurrences of error message '(call stack is not deep enough)'
According to suggestions, I removed the [solved] status from post, since problem is still there for official version in opensuse tumbleweed repos.
I understand FreeCAD developers (by the way: thanks a lot!) that managing many different versions of dependencies is a real challenge. However, even if an AppImage is available which does not show the issue it is very probable it will come back one day, since the problem occurs with a more recent version of Qt.
So it remains probably of interest to investigate. Please tell me if I can be of any help
I understand FreeCAD developers (by the way: thanks a lot!) that managing many different versions of dependencies is a real challenge. However, even if an AppImage is available which does not show the issue it is very probable it will come back one day, since the problem occurs with a more recent version of Qt.
So it remains probably of interest to investigate. Please tell me if I can be of any help
-
- Posts: 12
- Joined: Mon May 10, 2021 6:56 pm
Re: Many occurrences of error message '(call stack is not deep enough)'
Same problem here, on Gentoo (rolling distro too).
OS: Gentoo/Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.2-r1
Build type: Gentoo
Python version: 3.9.5
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.4.0
Locale: English/United Kingdom (en_GB)
Since it has been asked from other posters, pivy version is 0.6.6
OS: Gentoo/Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.2-r1
Build type: Gentoo
Python version: 3.9.5
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.4.0
Locale: English/United Kingdom (en_GB)
Since it has been asked from other posters, pivy version is 0.6.6
-
- Posts: 12
- Joined: Mon May 10, 2021 6:56 pm
Re: Many occurrences of error message '(call stack is not deep enough)'
Problem seems to be gone with latest release.
OS: Gentoo/Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.2-r3
Build type: Gentoo
Python version: 3.9.5
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.4.0
Locale: English/United Kingdom (en_GB)
OS: Gentoo/Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.2-r3
Build type: Gentoo
Python version: 3.9.5
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.4.0
Locale: English/United Kingdom (en_GB)
Re: Many occurrences of error message '(call stack is not deep enough)'
confirmed: solved also on openSUSE Tumbleweed
OS: openSUSE Tumbleweed (KDE//usr/share/xsessions/plasma5)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.Unknown
Build type: Release
Python version: 3.8.10
Qt version: 5.15.2
Coin version: 3.1.3
OCC version: 7.5.1
Locale: French/France (fr_FR)
OS: openSUSE Tumbleweed (KDE//usr/share/xsessions/plasma5)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.Unknown
Build type: Release
Python version: 3.8.10
Qt version: 5.15.2
Coin version: 3.1.3
OCC version: 7.5.1
Locale: French/France (fr_FR)