STL file - impossible to modify

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
mchacher
Posts: 7
Joined: Sat Dec 14, 2019 11:10 am

STL file - impossible to modify

Postby mchacher » Tue May 11, 2021 6:51 am

Hi all,
I am struggling modifying the STL file attached. I would like to add a simple hole on the side, but after meshing it, converting to a solid, I am not able to apply a sketch and add this hole.
Does any one could try and provide me with a freecad example ... ?

Thanks a lot.
Attachments
parca4.stl
(21.62 KiB) Downloaded 6 times
User avatar
thomas-neemann
Posts: 2930
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE

Re: STL file - impossible to modify

Postby thomas-neemann » Tue May 11, 2021 7:16 am

mchacher wrote: Tue May 11, 2021 6:51 am
is that helpful?


https://www.youtube.com/watch?v=lZIdjU0AmG4

phpBB [video]
falls ein video-link von mir schwarz und nicht anklickbar sein sollte, hier der kanal: https://www.youtube.com/channel/UCVcztV ... 03GgKekj_g
es ist auch möglich auf antworten zu klicken um den link zu sehen.
chrisb
Posts: 35121
Joined: Tue Mar 17, 2015 9:14 am

Re: STL file - impossible to modify

Postby chrisb » Tue May 11, 2021 7:56 am

This is simple enough that it is not worth to invest any time in the conversion. It looks like just two simple padded sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.