False Orientation after export

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
Juanilogo
Posts: 21
Joined: Tue Apr 27, 2021 4:25 pm

False Orientation after export

Post by Juanilogo »

Hello,
I am exporting a part into .stl and one of The axles is rotated a determinated angle. Origin is the same, there is no Translation, but the Part has a Rotation.

How can I fix that?
Top
chrisb
Veteran
Posts: 54288
Joined: Tue Mar 17, 2015 9:14 am

Re: False Orientation after export

Post by chrisb »

Juanilogo wrote: ↑Fri May 14, 2021 1:43 pm I am exporting a part into .stl and one of The axles is rotated a determinated angle. Origin is the same, there is no Translation, but the Part has a Rotation.
Not knowing anything about the objectI would propose to change its Placement.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Top
Post Reply

Return to “Help on using FreeCAD”