I am in parts workbench. I create a cube. Now when I take its cross section, it creates 2 cross sections. One is called Box_cs and the other is Box_cs001. Why does it create 2 cross sections? And no, section checkbox was not checked, I just tried to create a simple cross section.
And they both seem identical.
Now , are these surfaces? Or are these wires in a square shape?
If it is a surface why does it seem hollow inside?
Taking cross sections
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 28
- Joined: Thu Dec 24, 2020 12:09 pm
Re: Taking cross sections
Please upload the file.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 28
- Joined: Thu Dec 24, 2020 12:09 pm
Re: Taking cross sections
I get here one Box_cs with not the very latest FreeCAD. Which parameters did you choose for the cross section?
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.24825 (Git)
Build type: Release
Branch: master
Hash: ccc4151b3020969450325466e385850783795325
Python version: 3.9.2
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.1
Locale: C/Default (C)
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.24825 (Git)
Build type: Release
Branch: master
Hash: ccc4151b3020969450325466e385850783795325
Python version: 3.9.2
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.1
Locale: C/Default (C)
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Taking cross sections
He clicked apply and OK>>> two sections.
Re: Taking cross sections
Aah yes, one of the old Path pitfalls.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 28
- Joined: Thu Dec 24, 2020 12:09 pm