Advise on part design
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Advise on part design
I find it a bit hard to visualize how this exact part could be designed.
What bothers me is basically how the top part exactly connects to the bottom cylinder.
I thought about using loft but I am not sure how exactly to go about this, for best results.
Would appreciate some directions.
Attaching the part file.
What bothers me is basically how the top part exactly connects to the bottom cylinder.
I thought about using loft but I am not sure how exactly to go about this, for best results.
Would appreciate some directions.
Attaching the part file.
- Attachments
-
- part.FCStd
- (86.69 KiB) Downloaded 23 times
-
- Screenshot from 2021-07-09 17-47-33.png (25.98 KiB) Viewed 825 times
Re: Advise on part design
I would use a revolve.
Re: Advise on part design
Like this:-
- Attachments
-
- eyebolt2.FCStd
- (309.66 KiB) Downloaded 23 times
Last edited by Bance on Fri Jul 09, 2021 3:51 pm, edited 1 time in total.
Re: Advise on part design
One has to think in 3D when using 3D cad
- papyblaise
- Veteran
- Posts: 8016
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Advise on part design
My eyebolt with spherical head
do the subtrac (bolt / M16)
do the subtrac (bolt / M16)
- Attachments
-
- boulon a oeil M16.FCStd
- (414.75 KiB) Downloaded 23 times
-
- boulon.PNG (34.12 KiB) Viewed 738 times
Re: Advise on part design
That's a nice approach! Thank you!papyblaise wrote: ↑Fri Jul 09, 2021 4:27 pm My eyebolt with spherical head
do the subtrac (bolt / M16)
Re: Advise on part design
The fillet is just a dress-up, the revolve and pad intersect, that is how they are joined.