for me it is the case when the spline has no curvature. then there is also line in the combo view.
B-spline_xyz? for surfacedesign
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- thomas-neemann
- Veteran
- Posts: 11939
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: B-spline_xyz? for surfacedesign
Re: B-spline_xyz? for surfacedesign
... you can also do a lot with PartWB, Sketcher and Boolean_Common e.g.
There would be more insight for help, if you give us an understandable picture.
There would be more insight for help, if you give us an understandable picture.
- Attachments
-
- Plate.FCStd
- FC.18.4
- (439.46 KiB) Downloaded 26 times
Re: B-spline_xyz? for surfacedesign
Thanks a lot,
bspline from arch is a very important function using curves and surface WB. Especially if you have to digitize 3D-parts like implants or bones.
Just now I am very happy with this solution and when finished I will show here.
Thanks again
bspline from arch is a very important function using curves and surface WB. Especially if you have to digitize 3D-parts like implants or bones.
Just now I am very happy with this solution and when finished I will show here.
Thanks again
Re: B-spline_xyz? for surfacedesign
Thank you hammax,
thats perfect for our new parts.
thats perfect for our new parts.
Re: B-spline_xyz? for surfacedesign
... the plate more "irregular" with placement operations.
- Attachments
-
- Plate_2.FCStd
- FC.18.4
- (789.57 KiB) Downloaded 25 times
Re: B-spline_xyz? for surfacedesign
.....amazing,
I give it a try.
I give it a try.
- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: B-spline_xyz? for surfacedesign
with PartDesign wb. (Fillets are too heavy for the forum)
- Attachments
-
- NimporteQuoi.FCStd
- (887.29 KiB) Downloaded 24 times
-
- Capture.PNG (181.57 KiB) Viewed 1232 times
Re: B-spline_xyz? for surfacedesign
I learn a lot, thats what I am looking for a long time.
thank you
norus
thank you
norus
Re: B-spline_xyz? for surfacedesign
here a example I am breaking my fingers and some synapses.
https://www.dropbox.com/s/71qsh6zie4y9o ... .step?dl=0
the question is how to design it from zero.
greetings
norus
https://www.dropbox.com/s/71qsh6zie4y9o ... .step?dl=0
the question is how to design it from zero.
greetings
norus
- Attachments
-
- spitze_2.PNG (44.28 KiB) Viewed 1170 times
-
- spitze_1.PNG (46.03 KiB) Viewed 1170 times
Re: B-spline_xyz? for surfacedesign
... the step.file is rather big for linking, but imported to FC it fits into the data limit.
To reduce the solid to a more simple design the radii must be removed, for getting bottom and top shape.
Designing cross sections you are able to use sketches on those sections and build shapes.
Something like Spitze_3 => quick and dirty!
If the file name "Spitze" implies a German source, please go to this subforum.
To reduce the solid to a more simple design the radii must be removed, for getting bottom and top shape.
Designing cross sections you are able to use sketches on those sections and build shapes.
Something like Spitze_3 => quick and dirty!
If the file name "Spitze" implies a German source, please go to this subforum.
- Attachments
-
- Spitze_3.FCStd
- FC.18.4
- (896.32 KiB) Downloaded 18 times
-
- Spitze_2.FCStd
- FC.18.4
- (639.77 KiB) Downloaded 22 times
Last edited by hammax on Mon Aug 09, 2021 9:14 am, edited 1 time in total.