3d printed adapter...designed in FreeCAD of course
For accurate and perpendicular insertion using a cheap soldering iron.
https://github.com/macdroid53/Solder ... pter
Question about threads and 3d printing
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Question about threads and 3d printing
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Question about threads and 3d printing
Good idea, thanks for sharing. Could be further improved by an adapter to the soldering iron assuring that the insert is properly aligned to the soldering iron. E.g. by a tangent constraint .
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Question about threads and 3d printing
I made tips for the iron for each size insert so the inserts self align on the end on the soldering iron
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Question about threads and 3d printing
Top!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.