Transform xyz position lost after FILLET

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
stovelsten
Posts: 3
Joined: Thu Sep 16, 2021 7:59 am

Transform xyz position lost after FILLET

Post by stovelsten »

Last edited by stovelsten on Thu Sep 16, 2021 8:58 pm, edited 1 time in total.
chrisb
Veteran
Posts: 53930
Joined: Tue Mar 17, 2015 9:14 am

Re: Transform xyz position lost after FILLET

Post by chrisb »

Hi and welcome to the forum!

Your image is not visible, you can attach it to the post. Furthermore you should describe the issue in detail and update to a current 0.19 or if you assume an error, retest it with 0.20.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
stovelsten
Posts: 3
Joined: Thu Sep 16, 2021 7:59 am

Re: Transform xyz position lost after FILLET

Post by stovelsten »

Thanks.
I upgrade my FC...
The four pics says everything...
chrisb
Veteran
Posts: 53930
Joined: Tue Mar 17, 2015 9:14 am

Re: Transform xyz position lost after FILLET

Post by chrisb »

stovelsten wrote: Thu Sep 16, 2021 9:03 pm The four pics says everything...
If you say so ... :?
Note that in Part workbench each operation creates a new object with its own placement.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
stovelsten
Posts: 3
Joined: Thu Sep 16, 2021 7:59 am

Re: Transform xyz position lost after FILLET

Post by stovelsten »

Thanks for the hint...
Post Reply