(FreeCad v. 0,18,2)
https://www.flickr.com/photos/49422161@ ... ed-public/
Transform xyz position lost after FILLET
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 3
- Joined: Thu Sep 16, 2021 7:59 am
Transform xyz position lost after FILLET
Last edited by stovelsten on Thu Sep 16, 2021 8:58 pm, edited 1 time in total.
Re: Transform xyz position lost after FILLET
Hi and welcome to the forum!
Your image is not visible, you can attach it to the post. Furthermore you should describe the issue in detail and update to a current 0.19 or if you assume an error, retest it with 0.20.
Your image is not visible, you can attach it to the post. Furthermore you should describe the issue in detail and update to a current 0.19 or if you assume an error, retest it with 0.20.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 3
- Joined: Thu Sep 16, 2021 7:59 am
Re: Transform xyz position lost after FILLET
Thanks.
I upgrade my FC...
The four pics says everything...
I upgrade my FC...
The four pics says everything...
Re: Transform xyz position lost after FILLET
If you say so ...
Note that in Part workbench each operation creates a new object with its own placement.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 3
- Joined: Thu Sep 16, 2021 7:59 am
Re: Transform xyz position lost after FILLET
Thanks for the hint...