FreeCAD Crashes after Launch

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
ThaShooty
Posts: 5
Joined: Thu Sep 23, 2021 5:37 pm

FreeCAD Crashes after Launch

Post by ThaShooty »

As the title already sais, FreeCAD is always crashing instantly, after the small loading window disappears. My PC can run Blender or Cura, for some reason (maybe its the same as with FreeCAD?) it can't run Creality Slicer. I've installed the newest version of FreeCAD.
I've already checked my drivers, they're all totally up to date.
I want to use FreeCad on my Dell Inspiron 5482. Specs:

Intel Core i7-8565U CPU @1,80 GHz
16GB RAM
KBG30ZMS512G NVMe TOSHIBA 512GB
Intel UHD Graphics 620
NVIDIA GeForce MX130

I already tried to deactivate the Intel UHD Graphics via the Device Manager, with the same result as before. Same with the GeForce MX130, which I also deactivated. Re-installing FreeCAD also didn't help, as well as launching it as an admin.
I created a launch log and compared it with the one from another PC, where FreeCAD is running as it should.
Here's the Launch log:

Code: Select all

Msg: FreeCAD 0.19, Libs: 0.19R24291 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = Wed Sep 22 23:07:14 2021
Log: AppDataSkipVendor = true
Log: AppHomePath = C:/Users/Fabi/AppData/Local/Programs/FreeCAD 0.19/
Log: AppIcon = freecad
Log: AppTempPath = C:\Users\Fabi\AppData\Local\Temp\
Log: BinPath = C:/Users/Fabi/AppData/Local/Programs/FreeCAD 0.19/bin\
Log: BuildRepositoryURL = git://github.com/FreeCAD/FreeCAD.git releases/FreeCAD-0-19
Log: BuildRevision = 24291 (Git)
Log: BuildRevisionBranch = releases/FreeCAD-0-19
Log: BuildRevisionDate = 2021/04/15 09:17:08
Log: BuildRevisionHash = 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 19
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = C:/Users/Fabi/AppData/Local/Programs/FreeCAD 0.19/doc\
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.19
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = C:\Users\Fabi\AppData\Roaming\FreeCAD\FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files\dotnet\;C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\Fabian R�ger\AppData\Local\Microsoft\WindowsApps;
Log: PythonSearchPath = C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\bin\python38.zip;C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\bin\DLLs;C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\bin\lib;C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\bin
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = C:\Users\Fabi\AppData\Roaming\FreeCAD\system.cfg
Log: UserAppData = C:\Users\Fabi\AppData\Roaming\FreeCAD\
Log: UserHomePath = C:\Users\Fabi\Dokumente
Log: UserParameter = C:\Users\Fabi\AppData\Roaming\FreeCAD\user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\AddonManager... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Arch... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Draft... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Drawing... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Fem... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Idf... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Image... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Import... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Inspection... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Material... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Measure... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Mesh... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\MeshPart... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\OpenSCAD... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Part... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\PartDesign... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Path... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Points... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Raytracing... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\ReverseEngineering... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Robot... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Show(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Sketcher... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Spreadsheet... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Start... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Surface... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\TechDraw... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Test... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Tux(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Web... done
Log: Using C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod as module path!
Log: System path after init:
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\bin
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\AddonManager
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Arch
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Draft
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Drawing
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Fem
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Idf
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Image
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Import
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Inspection
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Material
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Measure
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Mesh
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\MeshPart
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\OpenSCAD
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Part
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\PartDesign
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Path
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Points
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Raytracing
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\ReverseEngineering
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Robot
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Show
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Sketcher
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Spreadsheet
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Start
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Surface
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\TechDraw
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Test
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Tux
Log:    C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Web
Log:    C:\Windows\system32
Log:    C:\Windows
Log:    C:\Windows\System32\Wbem
Log:    C:\Windows\System32\WindowsPowerShell\v1.0\
Log:    C:\Windows\System32\OpenSSH\
Log:    C:\Program Files\Intel\WiFi\bin\
Log:    C:\Program Files\Common Files\Intel\WirelessCommon\
Log:    C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common
Log:    C:\Program Files\dotnet\
Log:    C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR
Log:    C:\WINDOWS\system32
Log:    C:\WINDOWS
Log:    C:\WINDOWS\System32\Wbem
Log:    C:\WINDOWS\System32\WindowsPowerShell\v1.0\
Log:    C:\WINDOWS\System32\OpenSSH\
Log:    C:\Users\Fabi\AppData\Local\Microsoft\WindowsApps
Log:    
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.6 (4.6.0 NVIDIA 471.11)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\AddonManager... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Arch... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Draft... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Drawing... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Fem... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Idf(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Image... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Import... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Inspection... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Material... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Measure(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Mesh... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\MeshPart... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\OpenSCAD... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Part... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\PartDesign... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Path... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Points... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Raytracing... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\ReverseEngineering... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Robot... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Show(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Sketcher... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Spreadsheet... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Start... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Surface... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\TechDraw... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Test... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Tux... done
Log: Init:      Initializing C:\Users\Fabi\AppData\Local\Programs\FreeCAD 0.19\Mod\Web... done
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: 3Dconnexion device not attached.
Log: Init: Entering event loop


The Event Viewer also doesn't show any suspicious things.
I already tried to use FreeCAD on version 0.18, didnt work either.

I dont know what i could do anymore, already many thanks for your help.
Last edited by ThaShooty on Fri Sep 24, 2021 1:24 pm, edited 1 time in total.
chrisb
Veteran
Posts: 53922
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCAD Crashes after Launch

Post by chrisb »

PLease retry with a current 0.20 from https://github.com/FreeCAD/FreeCAD-AppI ... kly-builds, it has some new libraries. I guess you found already the Known OS specific issues.

It is not too critical here, but you can edit your post above and enclose the log output in code tags for improved readability.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
GeneFC
Veteran
Posts: 5373
Joined: Sat Mar 19, 2016 3:36 pm
Location: Punta Gorda, FL

Re: FreeCAD Crashes after Launch

Post by GeneFC »

ThaShooty wrote: Thu Sep 23, 2021 6:14 pm
C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\Fabian R�ger\AppData\Local\Microsoft\WindowsApps;

I dont know what i could do anymore, already many thanks for your help.
It appears there may be a non-ASCII character in your name. FreeCAD works pretty well with lots of characters, but sometimes non-ASCII characters in folder names can cause problems.

Gene
ThaShooty
Posts: 5
Joined: Thu Sep 23, 2021 5:37 pm

Re: FreeCAD Crashes after Launch

Post by ThaShooty »

chrisb wrote: Thu Sep 23, 2021 8:19 pm PLease retry with a current 0.20 from https://github.com/FreeCAD/FreeCAD-AppI ... kly-builds, it has some new libraries. I guess you found already the Known OS specific issues.

It is not too critical here, but you can edit your post above and enclose the log output in code tags for improved readability.


i've tried your solution, it didn't work either. But i've found something weird in the log this time:

Code: Select all

Msg: FreeCAD 0.20, Libs: 0.20R25645 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = Fri Sep 24 14:15:32 2021
Log: AboutImage = freecadabout
Log: AppDataSkipVendor = true
Log: AppHomePath = C:/Eigenes/FreeCAD/
Log: AppIcon = freecad
Log: AppTempPath = C:\Users\Fabian Röger\AppData\Local\Temp\
Log: BinPath = C:/Eigenes/FreeCAD/bin\
Log: BuildRepositoryURL = D:ldgit_cachegithub.comFreeCADFreeCAD master
Log: BuildRevision = 25645 (Git)
Log: BuildRevisionBranch = master
Log: BuildRevisionDate = 2021/09/03 06:31:08
Log: BuildRevisionHash = 37d9757399b4c2ec30318eb88d7cd7c508246345
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 20
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = C:/Eigenes/FreeCAD/doc\
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.20
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files\dotnet\;C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\Fabian R�ger\AppData\Local\Microsoft\WindowsApps;
Log: PythonSearchPath = C:\Eigenes\FreeCAD\bin\python38.zip;C:\Eigenes\FreeCAD\bin\DLLs;C:\Eigenes\FreeCAD\bin\lib;C:\Eigenes\FreeCAD\bin
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\system.cfg
Log: UserAppData = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\
Log: UserHomePath = C:\Users\Fabian Röger\Dokumente
Log: UserParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\AddonManager... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Arch... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Draft... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Drawing... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Fem... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Idf... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Image... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Import... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Inspection... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Material... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Measure... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Mesh... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\MeshPart... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\OpenSCAD... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Part... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\PartDesign... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Path... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Points... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Raytracing... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\ReverseEngineering... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Robot... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Show(Init.py not found)... ignore
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Sketcher... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Spreadsheet... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Start... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Surface... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\TechDraw... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Test... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Tux(Init.py not found)... ignore
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Web... done
Log: Init: Initializing freecad.asm3
Log: Init: No init module found in freecad.asm3, skipping
Log: Init: Initializing freecad.freecad_glider
Log: Init: Initializing freecad.freecad_glider... done
Log: Using C:\Eigenes\FreeCAD\Mod as module path!
Log: System path after init:
Log:    C:\Eigenes\FreeCAD\bin
Log:    C:\Eigenes\FreeCAD\Mod\AddonManager
Log:    C:\Eigenes\FreeCAD\Mod\Arch
Log:    C:\Eigenes\FreeCAD\Mod\Draft
Log:    C:\Eigenes\FreeCAD\Mod\Drawing
Log:    C:\Eigenes\FreeCAD\Mod\Fem
Log:    C:\Eigenes\FreeCAD\Mod\Idf
Log:    C:\Eigenes\FreeCAD\Mod\Image
Log:    C:\Eigenes\FreeCAD\Mod\Import
Log:    C:\Eigenes\FreeCAD\Mod\Inspection
Log:    C:\Eigenes\FreeCAD\Mod\Material
Log:    C:\Eigenes\FreeCAD\Mod\Measure
Log:    C:\Eigenes\FreeCAD\Mod\Mesh
Log:    C:\Eigenes\FreeCAD\Mod\MeshPart
Log:    C:\Eigenes\FreeCAD\Mod\OpenSCAD
Log:    C:\Eigenes\FreeCAD\Mod\Part
Log:    C:\Eigenes\FreeCAD\Mod\PartDesign
Log:    C:\Eigenes\FreeCAD\Mod\Path
Log:    C:\Eigenes\FreeCAD\Mod\Points
Log:    C:\Eigenes\FreeCAD\Mod\Raytracing
Log:    C:\Eigenes\FreeCAD\Mod\ReverseEngineering
Log:    C:\Eigenes\FreeCAD\Mod\Robot
Log:    C:\Eigenes\FreeCAD\Mod\Show
Log:    C:\Eigenes\FreeCAD\Mod\Sketcher
Log:    C:\Eigenes\FreeCAD\Mod\Spreadsheet
Log:    C:\Eigenes\FreeCAD\Mod\Start
Log:    C:\Eigenes\FreeCAD\Mod\Surface
Log:    C:\Eigenes\FreeCAD\Mod\TechDraw
Log:    C:\Eigenes\FreeCAD\Mod\Test
Log:    C:\Eigenes\FreeCAD\Mod\Tux
Log:    C:\Eigenes\FreeCAD\Mod\Web
Log:    C:\Windows\system32
Log:    C:\Windows
Log:    C:\Windows\System32\Wbem
Log:    C:\Windows\System32\WindowsPowerShell\v1.0\
Log:    C:\Windows\System32\OpenSSH\
Log:    C:\Program Files\Intel\WiFi\bin\
Log:    C:\Program Files\Common Files\Intel\WirelessCommon\
Log:    C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common
Log:    C:\Program Files\dotnet\
Log:    C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR
Log:    C:\WINDOWS\system32
Log:    C:\WINDOWS
Log:    C:\WINDOWS\System32\Wbem
Log:    C:\WINDOWS\System32\WindowsPowerShell\v1.0\
Log:    C:\WINDOWS\System32\OpenSSH\
Log:    C:\Users\Fabian Röger\AppData\Local\Microsoft\WindowsApps
Log:    
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.6 (4.6.0 NVIDIA 471.11)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\AddonManager... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Arch... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Draft... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Drawing... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Fem... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Idf(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Image... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Import... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Inspection... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Material... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Measure(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Mesh... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\MeshPart... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\OpenSCAD... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Part... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\PartDesign... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Path... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Points... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Raytracing... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\ReverseEngineering... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Robot... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Show(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Sketcher... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Spreadsheet... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Start... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Surface... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\TechDraw... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Test... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Tux... done
Log: Init:      Initializing C:\Eigenes\FreeCAD\Mod\Web... done
Log: Init: Initializing freecad.asm3
Log: Module: Part
Log: Loading Part module... done
Log: Init: Initializing freecad.asm3... done
Log: Init: Initializing freecad.freecad_glider
Log: Init: Initializing freecad.freecad_glider... done
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: Installed Qt WebEngine locales directory not found at location C:/Eigenes/FreeCAD/translations\qtwebengine_locales. Trying application directory...
Log: Qt WebEngine locales directory not found at location C:/Eigenes/FreeCAD/bin\qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: 3Dconnexion device not attached.
Log: Init: Entering event loop

Log: Installed Qt WebEngine locales directory not found at location C:/Eigenes/FreeCAD/translations\qtwebengine_locales. Trying application directory...
Log: Qt WebEngine locales directory not found at location C:/Eigenes/FreeCAD/bin\qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.

I'm not sure whether this could be my problem, but i also don't know how i could fix it.

The OS specific issues don't seem to fit to my problem, in my opinion..
ThaShooty
Posts: 5
Joined: Thu Sep 23, 2021 5:37 pm

Re: FreeCAD Crashes after Launch

Post by ThaShooty »

GeneFC wrote: Thu Sep 23, 2021 9:01 pm
ThaShooty wrote: Thu Sep 23, 2021 6:14 pm
C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\Fabian R�ger\AppData\Local\Microsoft\WindowsApps;

I dont know what i could do anymore, already many thanks for your help.
It appears there may be a non-ASCII character in your name. FreeCAD works pretty well with lots of characters, but sometimes non-ASCII characters in folder names can cause problems.

Gene
Your solution sadly didn't seem to work for me as well.

Fabi
TheMarkster
Veteran
Posts: 5505
Joined: Thu Apr 05, 2018 1:53 am

Re: FreeCAD Crashes after Launch

Post by TheMarkster »

Log: UserParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\user.cfg
Try deleting that file and also the system.cfg in the same folder.
ThaShooty
Posts: 5
Joined: Thu Sep 23, 2021 5:37 pm

Re: FreeCAD Crashes after Launch

Post by ThaShooty »

TheMarkster wrote: Fri Sep 24, 2021 6:05 pm
Log: UserParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\user.cfg
Try deleting that file and also the system.cfg in the same folder.

I Can't find that file, in this folder there is only the log (FreeCAD.log), a file called "crash.log", "crash.dmp" and a folder called "Macro", which is empty. The folder is always recreated as i start FreeCAD, the both "crash"-files not.
TheMarkster
Veteran
Posts: 5505
Joined: Thu Apr 05, 2018 1:53 am

Re: FreeCAD Crashes after Launch

Post by TheMarkster »

ThaShooty wrote: Fri Sep 24, 2021 6:26 pm
TheMarkster wrote: Fri Sep 24, 2021 6:05 pm
Log: UserParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\user.cfg
Try deleting that file and also the system.cfg in the same folder.

I Can't find that file, in this folder there is only the log (FreeCAD.log), a file called "crash.log", "crash.dmp" and a folder called "Macro", which is empty. The folder is always recreated as i start FreeCAD, the both "crash"-files not.
It might be as Gene has suggested, the non-ASCII characters in the folder name. As a test you could try creating a new username Fabian and run FreeCAD on that account to see what happens.
jeno
Veteran
Posts: 1820
Joined: Sun Jun 29, 2014 10:41 am

Re: FreeCAD Crashes after Launch

Post by jeno »

ThaShooty wrote: Thu Sep 23, 2021 6:14 pm As the title already sais, FreeCAD is always crashing instantly, after the small loading window disappears. My PC can run Blender or Cura, for some reason (maybe its the same as with FreeCAD?) it can't run Creality Slicer. I've installed the newest version of FreeCAD.
I've already checked my drivers, they're all totally up to date.
I want to use FreeCad on my Dell Inspiron 5482. Specs:

Intel Core i7-8565U CPU @1,80 GHz
16GB RAM
KBG30ZMS512G NVMe TOSHIBA 512GB
Intel UHD Graphics 620
NVIDIA GeForce MX130
ThaShooty wrote: Fri Sep 24, 2021 12:27 pm ...
The OS specific issues don't seem to fit to my problem, in my opinion..
I think no 12 does fit or at least it is worth a try
12
Freecad does not start or does not open a new file or 3d-view
It was reported with multiple graphics cards for Nvidia Optimus hybrid and AMD Radeon graphics cards.
This can occur all of a sudden if some other software is installed.

On these hybrid systems applications can use both graphic cards. They use in standard mode only the internal Intel HD, and delegate accellerated operations to the Nvidia card.
See also this posts in the german forum and this one with detailed descriptions.

Solution (Nvidia):
You have to correct a misconfiguration of the driver settings. Please add freecad executables to the programs which need 3d-acceleration. You can use the right mouse context menu and select execution with Nvidia. See also Nvidia knowledgebase
It makes things more complicate to sort out when you use 0.19 and 0.20 under different users (Fabi <> Fabian Röger)

Regards
ThaShooty
Posts: 5
Joined: Thu Sep 23, 2021 5:37 pm

Re: FreeCAD Crashes after Launch

Post by ThaShooty »

TheMarkster wrote: Sat Sep 25, 2021 12:35 am
ThaShooty wrote: Fri Sep 24, 2021 6:26 pm
TheMarkster wrote: Fri Sep 24, 2021 6:05 pm
Log: UserParameter = C:\Users\Fabian Röger\AppData\Roaming\FreeCAD\user.cfg
Try deleting that file and also the system.cfg in the same folder.

I Can't find that file, in this folder there is only the log (FreeCAD.log), a file called "crash.log", "crash.dmp" and a folder called "Macro", which is empty. The folder is always recreated as i start FreeCAD, the both "crash"-files not.
It might be as Gene has suggested, the non-ASCII characters in the folder name. As a test you could try creating a new username Fabian and run FreeCAD on that account to see what happens.
You're right, now it actually works. I've created a new user on my pc, installed FreeCAD and it didn't crash. Many thanks for your help <3
Post Reply