[Solved] Changing engraving depth

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
vk3ohm
Posts: 35
Joined: Sun Mar 08, 2020 10:42 am
Location: Melbourne, Australia

[Solved] Changing engraving depth

Post by vk3ohm »

OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/Australia (en_AU)

I have created a luggage label using the technique described in the ShapeString tutorial. Unfortunately, one of the engraved texts has an incorrect depth. The mobile number has the correct depth of 3mm. Unfortunately, when I made the name engraving I only set the depth to 2mm. I would like it to be 3 also. Changing the Length Fwd parameter of Extrude001 makes no difference. How can I change the depth?
Attachments
Luggage label.FCStd
(563.28 KiB) Downloaded 25 times
Last edited by vk3ohm on Mon Sep 27, 2021 7:37 am, edited 1 time in total.
User avatar
papyblaise
Veteran
Posts: 7864
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: Changing engraving depth

Post by papyblaise »

it is not smart to have to give your name and your N ° on a forum, you risk to sleep badly the next days
your mistake is in the placement: one is at Z = 2 and the other Z = 3
Post Reply