OS: Manjaro Linux (XFCE/xfce)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: makepkg
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.9.6
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
I have a cone(see blue cone picture) which is a cylinder running in the middle.
I have designed the cylinder with the correct dimensions(circumference, thickness), but I noticed that the bottom piece of the cone is less thicker than the top bit.
Basically, the bottom piece of the cylinder goes down from the internal side of the cylinder.
How do I reduce the thickness of the bottom portion of the cylinder? Maybe just 20mm
Q2:
The cone(see picture) has another shape attached to it at the bottom.
Do I design this piece separately and then put the 2 pieces together? cylinder + other shape
Is there a tutorial on how to join the 2 pieces?
Cylinder(Cone) Design - some questions
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Cylinder(Cone) Design - some questions
- Attachments
-
- cone-bottom.jpg (195.47 KiB) Viewed 672 times
-
- cone.jpg (45.15 KiB) Viewed 672 times
-
- basic.FCStd
- (12.05 KiB) Downloaded 17 times
- Shalmeneser
- Veteran
- Posts: 9582
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Cylinder(Cone) Design - some questions
You should work with PartDesign_Revolution.
- Attachments
-
- Capture du 2021-10-12 21-50-09.png (74.89 KiB) Viewed 656 times
-
- Revolution.FCStd
- (18.8 KiB) Downloaded 17 times
Re: Cylinder(Cone) Design - some questions
Thanks! I will download your freecad file and see how you designed it. Much appreciated