A2plus constraint - which part has dominance?

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
keltel
Posts: 57
Joined: Fri Oct 15, 2021 11:52 pm

A2plus constraint - which part has dominance?

Post by keltel »

Hello.

In this example I have a base plate with a 25mm dia hole, and a bearing block on top. I select the hole edge and the bearing inner edge and apply a constraint - either axis-axis or point-point. Each time the base plate moves (with respect to it's sketch) and the bearing stays put. If I set the bearing to fixed position = false then the constraint fails with "The highlighted parts were not moved. they are not constrained to a fixed part!"

How can I make the bearing move instead?

Image

TIA. Kel.
User avatar
babaroga
Posts: 178
Joined: Sun Aug 14, 2016 6:52 pm
Location: Banja Luka, Republic of Srpska, Bosnia and Herzegovina

Re: A2plus constraint - which part has dominance?

Post by babaroga »

Make base plate fixed...
chrisb
Veteran
Posts: 53930
Joined: Tue Mar 17, 2015 9:14 am

Re: A2plus constraint - which part has dominance?

Post by chrisb »

Moved to Assembly forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply