E.g. my part is 27mm height and I want to chamfer it flush, however I can't set chamfer size to 27mm, only 26mm and it leaves 1mm uncut. How can I chamfer full height?
Chamfer full height
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Chamfer full height
The geometric kernel can fail if a chamfer consumes all of an adjacent face or edge. Try current 0.20, it chamfered a testfile here quite well.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Veteran
- Posts: 5513
- Joined: Thu Apr 05, 2018 1:53 am
Re: Chamfer full height
That should probably be done in a sketch as a angled line. Draft is what I think your after but they are not all that stable.
Re: Chamfer full height
Chose 26.99mm option. Thanks all!