https://we.tl/t-sYp1EaO16t
I was not able to upload the file but there is a link above. No need for an account.
Is there a reason why the polygon sweeps perfectly but the circle simply won't do it?
Please help!
polygon works but circle won't sweep correctly
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
polygon works but circle won't sweep correctly
- Attachments
-
- sweep exercise 010.PNG (54.31 KiB) Viewed 1118 times
Re: polygon works but circle won't sweep correctly
OS: Windows 8.1 Version 6.3 (Build 9600)
Word size of FreeCAD: 64-bit
Version: 0.20.24720 (Git)
Build type: Release
Branch: master
Hash: 8b0c58d1b45017ad42bf0fa8f827f1cf22a398e7
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/South Africa (en_ZA)
Word size of FreeCAD: 64-bit
Version: 0.20.24720 (Git)
Build type: Release
Branch: master
Hash: 8b0c58d1b45017ad42bf0fa8f827f1cf22a398e7
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/South Africa (en_ZA)
- papyblaise
- Veteran
- Posts: 7998
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: polygon works but circle won't sweep correctly
you must use PartWb for Sweeps
you have to draw the sketches in a place where they are as well as possible perpendicular to the path
use the edge of the volume (like sole) as a path and leave Frenet = false
you have to draw the sketches in a place where they are as well as possible perpendicular to the path
use the edge of the volume (like sole) as a path and leave Frenet = false
- Attachments
-
- semelle.FCStd
- (806 KiB) Downloaded 24 times
-
- semelle.PNG (27.61 KiB) Viewed 1057 times
Re: polygon works but circle won't sweep correctly
even when I use your sketch to sweep the edge I get a messed up result.papyblaise wrote: ↑Sat Oct 23, 2021 2:34 pm you must use PartWb for Sweeps
you have to draw the sketches in a place where they are as well as possible perpendicular to the path
use the edge of the volume (like sole) as a path and leave Frenet = false
What am I doing wrong? I used PartWB.
- Attachments
-
- sweep exercise 011.PNG (76.58 KiB) Viewed 1022 times
- papyblaise
- Veteran
- Posts: 7998
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: polygon works but circle won't sweep correctly
you have to update your version Fc
Re: polygon works but circle won't sweep correctly
Both faces are working. But adjust your deviation parameter lower (under 0,5) to get a nice result.
Check the curve continuity as well, your curve is not here (with Comb from curves wb)
Check the curve continuity as well, your curve is not here (with Comb from curves wb)
- Attachments
-
- sweep045_2.FCStd
- (1011.91 KiB) Downloaded 22 times
-
- Capture.JPG (88.73 KiB) Viewed 951 times
Re: polygon works but circle won't sweep correctly
deviation parameter was the problem. I set it to 0.45 and now I can see the full sweep!!! Thank you.