hole in stl file cam
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
alibasfreecad
- Posts: 1
- Joined: Sat Oct 23, 2021 8:21 pm
hole in stl file cam
hi i am trying to cam one of the stl file but cant make hole in path because not detected as circle the hole is how to make it
Re: hole in stl file cam
Hi and welcome to the forum!
The image is not visible. To proces this with the Path workbench, you have to convert it to a solid. There are lots of posts about this. You switch to Part workbench, convert the mesh to a shape and then the shape to a solid.
The image is not visible. To proces this with the Path workbench, you have to convert it to a solid. There are lots of posts about this. You switch to Part workbench, convert the mesh to a shape and then the shape to a solid.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.