When I create an LCS concentric to the larger radius of the top left teardrop-shaped hole in this Part the z_axis is aligned correctly but the others are rotated 122 degrees.
The FCStd can be downloaded at https://1drv.ms/u/s!ArMxdUYEh9fKwAcGMKn ... 1?e=7CArsk. It is marginally too large.
Apart from guessing, which is what I am doing at the moment, is there a kosher way to get the X-axis of the LCS horizontal?LCS on Arc misaligned
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
LCS on Arc misaligned
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- papyblaise
- Veteran
- Posts: 7872
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: LCS on Arc misaligned
Abracadabra also worksApart from guessing
without knowing which other direction, LCS guess you only have the Z axis
there is several question: why does your file start at sketch012, where are the previous 11
there is a problem in "BottomPlate Foot Fillet
and 1 other manifesto but I don't know where
a Refine = true from time to time is not too much
- Attachments
-
- erreurs.PNG (114.17 KiB) Viewed 899 times
-
- Veteran
- Posts: 5505
- Joined: Thu Apr 05, 2018 1:53 am
Re: LCS on Arc misaligned
You want spells? Try https://www.amazon.com/Wizard-Id-Frammi ... 0449136817
Zoom out to make the object smaller - you'll see the other axes.papyblaise wrote: ↑Sun Oct 24, 2021 3:06 pm without knowing which other direction, LCS guess you only have the Z axis
There are 30+ Bodies in the Document and 300-odd sketches. What I sent was trimmed to the body in question.papyblaise wrote: ↑Sun Oct 24, 2021 3:06 pm there is several question: why does your file start at sketch012, where are the previous 11
Yes. There was a viral addition to one of the sketches. Gone now.papyblaise wrote: ↑Sun Oct 24, 2021 3:06 pm there is a problem in "BottomPlate Foot Fillet
and 1 other manifesto but I don't know where
Haven't used it.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: LCS on Arc misaligned
Sure does. Thanks.TheMarkster wrote: ↑Sun Oct 24, 2021 8:25 pm Attaching to the sketch arc, MapMode = Inertial CS seems to work.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble