[solved] I have a problem with the angular dimensioning in draft.
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
[solved] I have a problem with the angular dimensioning in draft.
am i making a mistake or is there a work around etc ?
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26155 (Git) AppImage
Build type: Release
Branch: master
Hash: 0926a4148bcff11249fd4f56bc30256102ffe105
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
edit
also here
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26202 (Git) AppImage
Build type: Release
Branch: master
Hash: ca6d49d080dea0abc23d954743eca7c46f33469b
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26155 (Git) AppImage
Build type: Release
Branch: master
Hash: 0926a4148bcff11249fd4f56bc30256102ffe105
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
edit
also here
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26202 (Git) AppImage
Build type: Release
Branch: master
Hash: ca6d49d080dea0abc23d954743eca7c46f33469b
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
Last edited by thomas-neemann on Thu Oct 28, 2021 11:11 am, edited 1 time in total.
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: I have a problem with the angular dimensioning in draft.
here is a workaround. if you turn the plane in which the dimensions are located into a main plane, it seems to work.
I consider this behavior to be dangerous because it may not be noticed and this may result in damage or a delay in deadlines.
https://www.youtube.com/watch?v=T13pRBpEOg0
I consider this behavior to be dangerous because it may not be noticed and this may result in damage or a delay in deadlines.
https://www.youtube.com/watch?v=T13pRBpEOg0
Re: I have a problem with the angular dimensioning in draft.
I think this is a bug. In the image in the first post the big angle of 319,39 is correct and the small angle of 30.51 is wrong.
In the properties of the angle they both have a first or second angle of 52.13 and the other angle is different.
I did the dimensioning several times and each time the same result
In the properties of the angle they both have a first or second angle of 52.13 and the other angle is different.
I did the dimensioning several times and each time the same result
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: I have a problem with the angular dimensioning in draft.
thank you willem for your cooperation. the problem also seems to occur if only the view is rotated between the creation of the geometry and the dimensioning.
https://www.youtube.com/watch?v=GS07dgbPNZY
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26202 (Git) AppImage
Build type: Release
Branch: master
Hash: ca6d49d080dea0abc23d954743eca7c46f33469b
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
edit
I have not yet been able to reliably reproduce it, sometimes everything is correct and sometimes everything is not.
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: I have a problem with the angular dimensioning in draft.
with 19.2 I managed to reproduce the error twice in a row. before and between the two tests I deleted .FreeCAD and .config / FreeCAD
here are the uncut videos
https://www.youtube.com/watch?v=FioDFiTUVn8
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 0.19.2)
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.8
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.4.0
Locale: German/Germany (de_DE)
here are the uncut videos
https://www.youtube.com/watch?v=FioDFiTUVn8
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 0.19.2)
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.8
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.4.0
Locale: German/Germany (de_DE)
Re: I have a problem with the angular dimensioning in draft.
AFAICT this problem occurs if end points of the selected edges are coincident with their intersection. The attached file should fix the issue. It should be placed in:
<install_folder>/Mod/Draft/draftguitools/
<install_folder>/Mod/Draft/draftguitools/
- Attachments
-
- gui_dimensions.py
- (27.74 KiB) Downloaded 27 times
Re: I have a problem with the angular dimensioning in draft.
Hi Roy_043, greetings to the Community!
Many thanks (!) For sharing / suggesting the solution (it was a big flaw), but I don't understand why the correct file has not yet been included in the (?) Compiled distributions.
The attached images demonstrate (using TechDraw) the effectiveness of the correction of the defect and then the extreme versatility in 3D, you simply need to align the work surface and the "game" is done.
Many thanks (!) For sharing / suggesting the solution (it was a big flaw), but I don't understand why the correct file has not yet been included in the (?) Compiled distributions.
The attached images demonstrate (using TechDraw) the effectiveness of the correction of the defect and then the extreme versatility in 3D, you simply need to align the work surface and the "game" is done.
- Attachments
-
- test.FCStd
- (14.93 KiB) Downloaded 27 times
-
- check_with_TechDraw.png (157.49 KiB) Viewed 1371 times
-
- 3D_dimensions.png (220.19 KiB) Viewed 1371 times
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: I have a problem with the angular dimensioning in draft.
Thanks alot. I am very happy. I tested it and couldn't find any more problem.
here is the path for ubuntu systems
OS: Ubuntu 21.10 (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.9.2
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.5.1
Locale: German/Germany (de_DE)