Full screen grid in sketcher mode
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 3
- Joined: Sat Nov 27, 2021 9:48 am
Full screen grid in sketcher mode
Hello every one! Can't find how to expand grid in sketchers mode for full screen. I have only 500x500 mm area in grid, no matter how much size of cell.
- Attachments
-
- screen.png (334.5 KiB) Viewed 1285 times
Re: Full screen grid in sketcher mode
the grid expands/contracts based on the bounding box of the existing geometry.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Full screen grid in sketcher mode
the grid expands/contracts based on the bounding box of the existing geometry.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
-
- Posts: 3
- Joined: Sat Nov 27, 2021 9:48 am
Re: Full screen grid in sketcher mode
thanks i see, but it's no good for use
Re: Full screen grid in sketcher mode
I'm with a mobile now so can't check, but maybe have a look at the View properties of the sketch. Hopefully there is something there that can change this behavior.
Re: Full screen grid in sketcher mode
I rarely have the grid on, so IMO, the grid is not useful in general.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Full screen grid in sketcher mode
There is only an upper, but no lower limit.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Veteran
- Posts: 5512
- Joined: Thu Apr 05, 2018 1:53 am
Re: Full screen grid in sketcher mode
Add a point to the outlying area and the grid will expand to it. The point won't show up with the sketcher closed or you can remove it later.
-
- Posts: 3
- Joined: Sat Nov 27, 2021 9:48 am
Re: Full screen grid in sketcher mode
Thanks for all. As i see no check box or other function to expand grid, only create a new geometry((