How Disable Transform?

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
MMSN
Posts: 68
Joined: Wed May 28, 2014 7:36 pm

How Disable Transform?

Post by MMSN »

Hi I'm back to FreeCad doing the Ship WorkBench example, everything is fine since I clicked Transform and the outline drawing moved! Grrrr.
Please, how can I do to disable these tools (Transformation).
I am using FreeCad version 16.0.
Transform.JPG
Transform.JPG (112.64 KiB) Viewed 1117 times
chrisb
Veteran
Posts: 53929
Joined: Tue Mar 17, 2015 9:14 am

Re: How Disable Transform?

Post by chrisb »

Right Mouse on the yellow item in the tree; Finish editing.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
MMSN
Posts: 68
Joined: Wed May 28, 2014 7:36 pm

Re: How Disable Transform?

Post by MMSN »

Thanks very much chrisb!
Is there any procedure to deactivate it for a period of time so that it does not hinder the design process, i.e. does it not appear in the toolbar and thus does not confuse?
chrisb
Veteran
Posts: 53929
Joined: Tue Mar 17, 2015 9:14 am

Re: How Disable Transform?

Post by chrisb »

Try 0.20. Many object types have now an editing dialog entered on doubleclick.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
MMSN
Posts: 68
Joined: Wed May 28, 2014 7:36 pm

Re: How Disable Transform?

Post by MMSN »

chrisb wrote: Fri Dec 03, 2021 11:21 pm Try 0.20. Many object types have now an editing dialog entered on doubleclick.
FCV0.20 is not for my WVSP2-32 Bits.
I will try to be careful with this tool so as not to destroy in one click a lot of time spent in designing, especially when I was excited about doing the Ship(I)tutorial...
I have other laptop W7-64 where runs FCV0.17 but I like 0.16 because the sketch shows very clearly a die with the possibilities of the planes.
chrisb
Veteran
Posts: 53929
Joined: Tue Mar 17, 2015 9:14 am

Re: How Disable Transform?

Post by chrisb »

You could at least upgrade to 0.18.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply