Pad from sketck
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Pad from sketck
I'm new here and to CAD. Some background in CNC and 2D but not at this level. Made a sketch, rectangle with a couple of holes, closed it and when i try to pad it, it won't. Tells me it's not selected. Tried everything i could think of.
p.s. i'm running the latest ver of freecad, 0.19
p.s. i'm running the latest ver of freecad, 0.19
-
- Veteran
- Posts: 3191
- Joined: Thu Sep 24, 2020 10:31 pm
- Location: Hawaii
- Contact:
Re: Pad from sketck
We could help you more easily if you uploaded the file. Edit and attach to your original post.
Re: Pad from sketck
Did you create the lines in construction mode? (typically show as blue lines)
Construction lines don't show outside the sketch. And, can't create geometry.
They can be toggled to/from construction mode with: .
It would be nice to have your FreeCAD file and the information as recommended in the BIG PINK BANNER at the top of this page in the forum.
Otherwise we need to use the crystal ball to guess what you're on about...and wouldn't ya know, my crystal ball is in my other suit.
See, if you go to Help>About there is a big button that says Copy to clipboard. And, your version of this can be pasted in your post:
OS: Debian GNU/Linux 10 (buster) (XFCE/lightdm-xsession)
Word size of FreeCAD: 64-bit
Version: 0.20.27078 (Git)
Build type: Release
Branch: master
Hash: b836712c83556b4f30d3404e8ab9f5192979561c
Python version: 3.7.3
Qt version: 5.11.3
Coin version: 4.0.0a
OCC version: 7.6.0
Locale: English/UnitedStates (en_US)
Construction lines don't show outside the sketch. And, can't create geometry.
They can be toggled to/from construction mode with: .
It would be nice to have your FreeCAD file and the information as recommended in the BIG PINK BANNER at the top of this page in the forum.
Otherwise we need to use the crystal ball to guess what you're on about...and wouldn't ya know, my crystal ball is in my other suit.
See, if you go to Help>About there is a big button that says Copy to clipboard. And, your version of this can be pasted in your post:
OS: Debian GNU/Linux 10 (buster) (XFCE/lightdm-xsession)
Word size of FreeCAD: 64-bit
Version: 0.20.27078 (Git)
Build type: Release
Branch: master
Hash: b836712c83556b4f30d3404e8ab9f5192979561c
Python version: 3.7.3
Qt version: 5.11.3
Coin version: 4.0.0a
OCC version: 7.6.0
Locale: English/UnitedStates (en_US)
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
-
- Veteran
- Posts: 5513
- Joined: Thu Apr 05, 2018 1:53 am
Re: Pad from sketck
I don't think new users can attach files until their first post is approved. Is this really a sensible restriction? Nobody sees the post anyway until a moderator approves of it.
Re: Pad from sketck
Forget it, I'll do it with pencil, paper and ruller. Thanks for no help.
And fyi, i read the info in the big pink banner.
And fyi, i read the info in the big pink banner.
Re: Pad from sketck
I told you what is most probably the answer. Did you try what I suggested?
If you read the banner, then how come no info?
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
-
- Veteran
- Posts: 5513
- Joined: Thu Apr 05, 2018 1:53 am
Re: Pad from sketck
I can produce this error in Part::Extrude when not selecting the sketch first before running the command.
If it's all construction mode geometry you get this error in Part Design:
Somewhat related to this, I'm not sure when this was added, but in Part Design if you have a sketch and nothing selected and you run the Pad tool you get the Pad. I guess it figures since you only have one sketch that must be what you intend to Pad.
Re: Pad from sketck
Yes, I tried that later since, while looking for how to produce the error.
And, I noticed the Pad with nothing selected pads the available sketch behaviour as well.
But, the OP offers no particular info about workbench, etc. so, I guessed at a common problem...
And, I noticed the Pad with nothing selected pads the available sketch behaviour as well.
But, the OP offers no particular info about workbench, etc. so, I guessed at a common problem...
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Pad from sketck
This restriction doesn't exist. The first post can have attachments.TheMarkster wrote: ↑Sun Jan 16, 2022 7:29 pm I don't think new users can attach files until their first post is approved. Is this really a sensible restriction? Nobody sees the post anyway until a moderator approves of it.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- adrianinsaval
- Veteran
- Posts: 5552
- Joined: Thu Apr 05, 2018 5:15 pm
Re: Pad from sketck
And yet decide to ignore all of it and then have the audacity to complain about not receiving help without even providing meaningful information about your problem
Be a little understanding please drmacro's crystall ball is out of reach and mine ran out of magic juice so I sent it back for refurbishment