Crash on open of Sketch

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
chrisb
Veteran
Posts: 53933
Joined: Tue Mar 17, 2015 9:14 am

Crash on open of Sketch

Post by chrisb »

I have worked on the file from this post: https://forum.freecadweb.org/viewtopic.php?f=15&t=65421 and added a sketch attached to the sloped plane (yes I heard from the topological naming problem, which is not the issue here).
SnipScreenshot-cb8127.png
SnipScreenshot-cb8127.png (19.51 KiB) Viewed 1347 times
When I try to open the sketch for editing FreeCAD crashes.

The file was made in 27008, where it crashes as well as in the current version, details below. It doesn't crash in 26155. I couldn't create such a crashing sketch again, so it seems to depend on the special values of the rectangle.

To reproduce: Open the file and double click Sketch002.

Can you please confirm? I would then ping Abdullah, as it seems to come from the solver.

This is my post number 40,000, so I hope I got it right now: FreeCAD infos (check), image attached (check), file attached (check), detailed description (check).

Logfile:

Code: Select all

Msg: FreeCAD 0.20, Libs: 0.20R27078 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2022
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = 2022-Jan-20 05:07:00
Log: AboutImage = freecadabout
Log: AppDataSkipVendor = true
Log: AppHomePath = /Users/cb/Desktop/FreeCAD.app/Contents/Resources/
Log: AppIcon = freecad
Log: AppTempPath = /Users/cb/tmp/fcTemp/
Log: BOOST_VERSION = 1_74
Log: BinPath = /Users/cb/Desktop/FreeCAD.app/Contents/Resources/bin/
Log: BuildRepositoryURL = Unknown
Log: BuildRevision = 27078 (Git)
Log: BuildRevisionDate = 2022/01/15 16:34:13
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 20
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2022
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = /Users/cb/Desktop/FreeCAD.app/Contents/Resources/doc/
Log: EIGEN_VERSION = 3.4.0
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.20
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = /Users/cb/Library/Application Support/FreeCAD/FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: OCC_VERSION = 7.5.3
Log: PATH = /Library/TeX/texbin/makeindex:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/Library/TeX/texbin:/opt/X11/bin:/Users/cb/bin
Log: PYSIDE_VERSION = 5.13.2
Log: PYTHONHOME = /Users/cb/Desktop/FreeCAD.app/Contents/Resources
Log: PYTHONPATH = 
Log: PYTHON_VERSION = 3.9.9
Log: PythonSearchPath = /Users/cb/Desktop/FreeCAD.app/Contents/Resources/lib/python39.zip:/Users/cb/Desktop/FreeCAD.app/Contents/Resources/lib/python3.9:/Users/cb/Desktop/FreeCAD.app/Contents/Resources/lib/python3.9/lib-dynload
Log: QT_VERSION = 5.12.9
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = /Users/cb/Library/Preferences/FreeCAD/system.cfg
Log: UserAppData = /Users/cb/Library/Application Support/FreeCAD/
Log: UserCachePath = /Users/cb/Library/Caches/FreeCAD/Cache/
Log: UserConfigPath = /Users/cb/Library/Preferences/FreeCAD/
Log: UserHomePath = /Users/cb
Log: UserMacroPath = /Users/cb/Library/Application Support/FreeCAD/Macro/
Log: UserParameter = /Users/cb/Library/Preferences/FreeCAD/user.cfg
Log: Verbose = 
Log: XERCESC_VERSION = 3.2.3
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Mesh... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Draft... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/ReverseEngineering... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Drawing... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Test... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Fem... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Spreadsheet... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Web... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/TechDraw... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Path... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/MeshPart... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Show(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Sketcher... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Start... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/OpenSCAD... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Surface... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Robot... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Image... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Inspection... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Idf... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Arch... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/AddonManager... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Points... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Measure... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/PartDesign... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Tux(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Part... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Import... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Material... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Raytracing... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/FC_SU(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/ThreadProfile... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/.DS_Store(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/DynamicData... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/FeedsAndSpeeds-master(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/fcgear(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/A2plus... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Manipulator... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/fasteners... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/CurvedShapes... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/sheetmetal... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/ExplodedAssembly(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Curves/./(Init.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Assembly4... done
Log: Init: Initializing freecad.asm3
Log: Init: No init module found in freecad.asm3, skipping
Log: Init: Initializing freecad.freecad_glider
Log: Init: Initializing freecad.freecad_glider... done
Log: Init: Initializing freecad.Curves
Log: Init: No init module found in freecad.Curves, skipping
Log: Init: Initializing freecad.gears
Log: Init: No init module found in freecad.gears, skipping
Log: Using /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod as module path!
Log: System path after init:
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/bin
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Mesh
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Draft
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/ReverseEngineering
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Drawing
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Test
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Fem
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Spreadsheet
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Web
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/TechDraw
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Path
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/MeshPart
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Show
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Sketcher
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Start
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/OpenSCAD
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Surface
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Robot
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Image
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Inspection
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Idf
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Arch
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/AddonManager
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Points
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Measure
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/PartDesign
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Tux
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Part
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Import
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Material
Log:    /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Raytracing
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/FC_SU
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/ThreadProfile
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/.DS_Store
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/DynamicData
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/FeedsAndSpeeds-master
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/fcgear
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/A2plus
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/Manipulator
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/fasteners
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/CurvedShapes
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/sheetmetal
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/ExplodedAssembly
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/Curves
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/Curves/./
Log:    /Users/cb/Library/Application Support/FreeCAD/Mod/Assembly4
Log:    /Library/TeX/texbin/makeindex
Log:    /usr/local/bin
Log:    /usr/bin
Log:    /bin
Log:    /usr/sbin
Log:    /sbin
Log:    /Library/TeX/texbin
Log:    /opt/X11/bin
Log:    /Users/cb/bin
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: OpenGL version is: 2.1 (2.1 ATI-4.6.20)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Mesh... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Draft... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/ReverseEngineering... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Drawing... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Test... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Fem... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Spreadsheet... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Web... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/TechDraw... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Path... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/MeshPart... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Show(InitGui.py not found)... ignore
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Sketcher... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Start... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/OpenSCAD... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Surface... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Robot... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Image... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Inspection... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Idf(InitGui.py not found)... ignore
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Arch... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/AddonManager... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Points... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Measure(InitGui.py not found)... ignore
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/PartDesign... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Tux... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Part... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Import... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Material... done
Log: Init:      Initializing /Users/cb/Desktop/FreeCAD.app/Contents/Resources/Mod/Raytracing... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/FC_SU... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/ThreadProfile... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/.DS_Store(InitGui.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/DynamicData... done
Log: Module: Part
Log: Loading Part module... done
Log: Loading Path module... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/FeedsAndSpeeds-master... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/fcgear(InitGui.py not found)... ignore
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/A2plus... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Manipulator... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/fasteners... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/CurvedShapes... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/sheetmetal... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/ExplodedAssembly... done
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Curves/./(InitGui.py not found)... ignore
Log: Failed to get handle to CurvesWorkbench -- no icon can be generated, check classname in package.xml
Log: Init:      Initializing /Users/cb/Library/Application Support/FreeCAD/Mod/Assembly4... done
Log: All modules with GUIs using InitGui.py are now initialized
Log: Init: Initializing freecad.asm3
Log: Init: Initializing freecad.asm3... done
Log: Init: Initializing freecad.freecad_glider
Log: Init: Initializing freecad.freecad_glider... done
Log: Init: Initializing freecad.Curves
Log: Init: Initializing freecad.Curves... done
Log: Init: Initializing freecad.gears
Log: Init: Initializing freecad.gears... done
Log: All modules with GUIs initialized using pkgutil are now initialized
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Msg: FC_SU macro is enabledMsg: 
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: 3Dconnexion framework not found!
Log: Init: Entering event loop
Log: Init: Executing event loop...
Log: Init: Processing command line files
Log: Loading Sketcher module... done
Log: Loading PartDesign module... done
Log: Loading GUI of Part module... done
Log: Loading GUI of Sketcher module... done
Log: Loading GUI of PartDesign module... done
Log: Sketcher::setUpSketch()-T:0
Log: Sketcher::Solve()-DogLeg-T:0
The sketch can be opened in
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.26155 (Git)
Build type: Release
Branch: master
Hash: 0926a4148bcff11249fd4f56bc30256102ffe105
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: C/Default (C)

Crashes in
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.27078 (Git)
Build type: Release
Python version: 3.9.9
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: C/Default (C)
Attachments
sloped_edge_crash.FCStd
(18.32 KiB) Downloaded 22 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
TheMarkster
Veteran
Posts: 5505
Joined: Thu Apr 05, 2018 1:53 am

Re: Crash on open of Sketch

Post by TheMarkster »

I think this might already be fixed in master. I have a build compiling now from latest master. I'll test it when it completes.

Edit: No crash on the latest master. Copy/paste isn't working from the VM, so here is a screenshot of the info.
Snip macro screenshot-e17cea.png
Snip macro screenshot-e17cea.png (22.83 KiB) Viewed 1315 times
chrisb
Veteran
Posts: 53933
Joined: Tue Mar 17, 2015 9:14 am

Re: Crash on open of Sketch

Post by chrisb »

Thanks! I will retest when the new version is available.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: Crash on open of Sketch

Post by openBrain »

Can confirm it's solved in
OS: Ubuntu 21.04 (KDE/plasma)
Word size of FreeCAD: 64-bit
Version: 0.20.27096
Build type: Release
Branch: master
Hash: fdabaf692b8cae4126a463ffe35da560f3ec078e
Python version: 3.9.5
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.5.2
Locale: French/France (fr_FR)
User avatar
Shalmeneser
Veteran
Posts: 9475
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: Crash on open of Sketch

Post by Shalmeneser »

chrisb wrote: Thu Jan 20, 2022 4:21 am This is my post number 40,000, so I hope I got it right now: FreeCAD infos (check), image attached (check), file attached (check), detailed description (check).
I think that new standard for good post recommands to give Astrological sign.

You are the proof that each newbie can progress.

(No problem in 0.20.26498)
chrisb
Veteran
Posts: 53933
Joined: Tue Mar 17, 2015 9:14 am

Re: Crash on open of Sketch

Post by chrisb »

Thanks for the positive and warm feedback!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
chrisb
Veteran
Posts: 53933
Joined: Tue Mar 17, 2015 9:14 am

Re: Crash on open of Sketch

Post by chrisb »

Confirmed: works on macOS too.
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.27319 (Git)
Build type: Release
Python version: 3.9.10
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: C/Default (C)
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
wmayer
Founder
Posts: 20243
Joined: Thu Feb 19, 2009 10:32 am
Contact:

Re: Crash on open of Sketch

Post by wmayer »

This was the corresponding fix: git commit e535204f8e25ac6
chrisb
Veteran
Posts: 53933
Joined: Tue Mar 17, 2015 9:14 am

Re: Crash on open of Sketch

Post by chrisb »

I forgot: Thanks for that! Didn't have a crash since!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply