OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
Is there a way to position/format the label numbers for the Details in this drawing?
Thanks
FCStd is here https://1drv.ms/u/s!ArMxdUYEh9fKwBri9KC ... W?e=PkHxmC
Can't move label on Drawing Detail
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Can't move label on Drawing Detail
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Can't move label on Drawing Detail
Sorry folks. Stripped to much out of the FCStd in attempt to get it to uploadable size. Here is the full beast:
https://1drv.ms/u/s!ArMxdUYEh9fKwBzgmkM ... _?e=DQmxL5
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
https://1drv.ms/u/s!ArMxdUYEh9fKwBzgmkM ... _?e=DQmxL5
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Can't move label on Drawing Detail
If you mean the caption that appears below the view, then the answer is no. There was a change this week to make the opaque matting around the detail smaller, so the text should be closer to the graphic now.
Re: Can't move label on Drawing Detail
Good to know. Thanks
My solution was to turn it off and replace it with an Annotation which I can place anywhere.
My solution was to turn it off and replace it with an Annotation which I can place anywhere.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't move label on Drawing Detail
If you are talking about what I think you are talking about then I would really love it if the 'padding' around the Detail was transparent. That would mean that I could place the Detail or Cross-section or whatever anywhere there is space for it without obscuring adjacent parts of the drawing. The reason I find that so attractive is that a lot of drawings get massacred when they are taken into the production shop. I have found that A4 Landscape Drawings in one of those plastic folders of A4 sleeves survive much better. Unfortunately this puts space on the A4 page at an absolute Premium.wandererfan wrote: ↑Wed Feb 02, 2022 2:09 pm There was a change this week to make the opaque matting around the detail smaller, so the text should be closer to the graphic now.
Cheers
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble