Dimensioning problem
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Dimensioning problem
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
The keyway in Detail 1 in this Drawing was created in the Document like this How can I dimension this shape in the Detail (or in the Drawing, come to that)?
Thanks
FCStd is here https://1drv.ms/u/s!ArMxdUYEh9fKwBri9KC ... W?e=PkHxmC
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
The keyway in Detail 1 in this Drawing was created in the Document like this How can I dimension this shape in the Detail (or in the Drawing, come to that)?
Thanks
FCStd is here https://1drv.ms/u/s!ArMxdUYEh9fKwBri9KC ... W?e=PkHxmC
- Attachments
-
- 220120 Driver Sprocket Dwg.pdf
- (392.29 KiB) Downloaded 35 times
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Dimensioning problem
I don't quite understand: you have constrained this fully in LHKeywaySketch.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Dimensioning problem
In the TechDraw View properties, Decoration section set Arc centers to True and use them for dimensioning.
Last edited by kisolre on Tue Feb 01, 2022 5:09 pm, edited 1 time in total.
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Dimensioning problem
Sorry folks. Stripped to much out of the FCStd in attempt to get it to uploadable size. Here is the full beast: https://1drv.ms/u/s!ArMxdUYEh9fKwBzgmkM ... _?e=DQmxL5
kisolre - thanks. In my version it was TechDraw --> Annotation --> Print Center Marks'
wandererfan wrote "Like this? Use the arc center mark ('+') as a vertex."
I can do that in the drawing proper but not in the Detail.
kisolre - thanks. In my version it was TechDraw --> Annotation --> Print Center Marks'
wandererfan wrote "Like this? Use the arc center mark ('+') as a vertex."
I can do that in the drawing proper but not in the Detail.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Dimensioning problem
What happens when you try to do it in the Detail? It seems to work here: with this:
OS: Linux Mint 20.3 (X-Cinnamon/cinnamon)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Branch: unknown
Hash: 0d9536ed3e8c7f40197b5606e1b7873625e1d6fe
Python version: 3.8.10
Qt version: 5.12.8
Coin version: 4.0.0
OCC version: 7.5.2
Locale: English/United States (en_US)
Re: Dimensioning problem
Nope. No Center in the Detail.
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
Different version - different fun?
OS: Windows 10 Version 2009Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
Different version - different fun?
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Dimensioning problem
Do you really have the centermarks on? In the preferences it's only a preset.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Dimensioning problem
This is what I did (see attached). Is there something else?
- Attachments
-
- 220202 TechDraw Preferences.png (114.54 KiB) Viewed 1642 times
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- Shalmeneser
- Veteran
- Posts: 9593
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Dimensioning problem
There is also this preference in the comboview.