Hole in Part Design: Hole Shaft tolerance

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
pasquale.papa
Posts: 15
Joined: Thu Apr 22, 2021 12:35 pm

BUG?? - Hole feature: hole/shaft tolerance

Post by pasquale.papa »

Dear all,

I'm using the FreeCAD 0.19.3.
I've noticed that when the threaded option is unchecked, the tolerance class is not selectable (It is in 0.18 Version). I think this is an error, because the tolerance class should be available only for the "not threaded holes" in order to define the hole/shaft coupling.

Let me have your opinions
24-01-2022_HOLE CLASS TOLERANCE.jpg
24-01-2022_HOLE CLASS TOLERANCE.jpg (87.56 KiB) Viewed 962 times
chrisb
Veteran
Posts: 53922
Joined: Tue Mar 17, 2015 9:14 am

Re: Hole in Part Design: Hole Shaft tolerance

Post by chrisb »

Check in 0.20.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
chrisb
Veteran
Posts: 53922
Joined: Tue Mar 17, 2015 9:14 am

Re: Hole in Part Design: Hole Shaft tolerance

Post by chrisb »

I have merged your topics. Check them and tell me which one to delete.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
pasquale.papa
Posts: 15
Joined: Thu Apr 22, 2021 12:35 pm

Re: Hole in Part Design: Hole Shaft tolerance

Post by pasquale.papa »

Help on using FreeCAD is good. How Can I check the post?
chrisb
Veteran
Posts: 53922
Joined: Tue Mar 17, 2015 9:14 am

Re: Hole in Part Design: Hole Shaft tolerance

Post by chrisb »

pasquale.papa wrote: Tue Jan 25, 2022 8:40 am Help on using FreeCAD is good. How Can I check the post?
They are both at the top of this topic. You can just look at them or you can compare their source texts, or make binary comparisons of the images or something else. On first glance they look equal, but I don't want to check this in detail.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
pasquale.papa
Posts: 15
Joined: Thu Apr 22, 2021 12:35 pm

Re: Hole in Part Design: Hole Shaft tolerance

Post by pasquale.papa »

They are equal. Delete the first one.
Thanks!
chrisb
Veteran
Posts: 53922
Joined: Tue Mar 17, 2015 9:14 am

Re: Hole in Part Design: Hole Shaft tolerance

Post by chrisb »

Done.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
pasquale.papa
Posts: 15
Joined: Thu Apr 22, 2021 12:35 pm

Re: Hole in Part Design: Hole Shaft tolerance

Post by pasquale.papa »

The issue is also present in 0.20
The Class Tolerance should be selectable for the not threaded Holes (i.e. when the Threaded option is unchecked)
Post Reply