Dear all,
I'm using the FreeCAD 0.19.3.
I've noticed that when the threaded option is unchecked, the tolerance class is not selectable (It is in 0.18 Version). I think this is an error, because the tolerance class should be available only for the "not threaded holes" in order to define the hole/shaft coupling.
Let me have your opinions
Hole in Part Design: Hole Shaft tolerance
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 15
- Joined: Thu Apr 22, 2021 12:35 pm
Re: Hole in Part Design: Hole Shaft tolerance
Check in 0.20.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Hole in Part Design: Hole Shaft tolerance
I have merged your topics. Check them and tell me which one to delete.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 15
- Joined: Thu Apr 22, 2021 12:35 pm
Re: Hole in Part Design: Hole Shaft tolerance
Help on using FreeCAD is good. How Can I check the post?
Re: Hole in Part Design: Hole Shaft tolerance
They are both at the top of this topic. You can just look at them or you can compare their source texts, or make binary comparisons of the images or something else. On first glance they look equal, but I don't want to check this in detail.pasquale.papa wrote: ↑Tue Jan 25, 2022 8:40 am Help on using FreeCAD is good. How Can I check the post?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 15
- Joined: Thu Apr 22, 2021 12:35 pm
Re: Hole in Part Design: Hole Shaft tolerance
They are equal. Delete the first one.
Thanks!
Thanks!
Re: Hole in Part Design: Hole Shaft tolerance
Done.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 15
- Joined: Thu Apr 22, 2021 12:35 pm
Re: Hole in Part Design: Hole Shaft tolerance
The issue is also present in 0.20
The Class Tolerance should be selectable for the not threaded Holes (i.e. when the Threaded option is unchecked)
The Class Tolerance should be selectable for the not threaded Holes (i.e. when the Threaded option is unchecked)