[Solved] Changing Sketch offset causes Revolve to Disappear
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 339
- Joined: Mon Aug 02, 2021 6:29 am
- Location: California, USA
[Solved] Changing Sketch offset causes Revolve to Disappear
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/United States (en_US)
I can't figure out what is going on here. I'm trying to draw up a clevis using Pipe and Revolve. I've gotten it to look pretty good for the most part, but I am running into some weird behavior when I try to do the second Revolve.
I create my second Sketch and put in these measurements (particularly the 1.005in offset from center).
I then apply the Revolve command to that sketch. The tool shows that the sketch is revolving around the wrong axis
No big deal here, so I change it to the horizontal axis. However, when I do that, the Revolve disappears
I messed around for an hour trying to find a solution and one of the things I noticed that when I created a new sketch and hadn't put in the Constraints, it showed the part revolving properly. However, once I got everything constrained the way I wanted and I left the Sketcher, The Revolve was now gone. I played around with things a little and out of curiosity I changed the Offset to 1.004in
Not a huge change, but low and behold, when I exited Sketcher, my Revolve was now there.
I can change that offset back to 1.005in and it disappears again.
Any idea why this is happening?
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/United States (en_US)
I can't figure out what is going on here. I'm trying to draw up a clevis using Pipe and Revolve. I've gotten it to look pretty good for the most part, but I am running into some weird behavior when I try to do the second Revolve.
I create my second Sketch and put in these measurements (particularly the 1.005in offset from center).
I then apply the Revolve command to that sketch. The tool shows that the sketch is revolving around the wrong axis
No big deal here, so I change it to the horizontal axis. However, when I do that, the Revolve disappears
I messed around for an hour trying to find a solution and one of the things I noticed that when I created a new sketch and hadn't put in the Constraints, it showed the part revolving properly. However, once I got everything constrained the way I wanted and I left the Sketcher, The Revolve was now gone. I played around with things a little and out of curiosity I changed the Offset to 1.004in
Not a huge change, but low and behold, when I exited Sketcher, my Revolve was now there.
I can change that offset back to 1.005in and it disappears again.
Any idea why this is happening?
Last edited by PAS_Drafter on Fri Jan 28, 2022 8:57 pm, edited 1 time in total.
-
- Posts: 339
- Joined: Mon Aug 02, 2021 6:29 am
- Location: California, USA
Re: Changing Sketch offset causes Revolve to Disappear
Here is the file I was working with. For some reason it wouldn't let me attach it to the original post.
- Attachments
-
- Clevis_Shackle.FCStd
- (156.27 KiB) Downloaded 31 times
Re: Changing Sketch offset causes Revolve to Disappear
Because you had already attached five images which are still files as far as the forum software is concerned.PAS_Drafter wrote: ↑Fri Jan 28, 2022 4:10 am For some reason it wouldn't let me attach it to the original post.
-
- Posts: 339
- Joined: Mon Aug 02, 2021 6:29 am
- Location: California, USA
Re: Changing Sketch offset causes Revolve to Disappear
I didn't know there was a limit to the total number of files attached. Good to know. ThanksSyres wrote: ↑Fri Jan 28, 2022 6:02 amBecause you had already attached five images which are still files as far as the forum software is concerned.PAS_Drafter wrote: ↑Fri Jan 28, 2022 4:10 am For some reason it wouldn't let me attach it to the original post.
Re: Changing Sketch offset causes Revolve to Disappear
I don't have a FreeCADable computer currently. Vague guesses are, that you may have double lines in your sketch or that some element have length or radius 0.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Changing Sketch offset causes Revolve to Disappear
I think you may have come across a bug which also resides in 0.20 current master but this is still to be definitely confirmed. In the meantime have a look at the way I'd model it even without knowing about the possible bug in the attached file. Mirrors and Patterns are your friend in the main.
OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24267 +99 (Git)
Build type: Release
Branch: Branch_0.19.3
Hash: 6530e364184ce05ccff39501e175cf2237e6ee4b
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.3
Locale: English/United Kingdom (en_GB)
OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24267 +99 (Git)
Build type: Release
Branch: Branch_0.19.3
Hash: 6530e364184ce05ccff39501e175cf2237e6ee4b
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.3
Locale: English/United Kingdom (en_GB)
- Attachments
-
- Clevis_Shackle_Syres_019.FCStd
- (220.29 KiB) Downloaded 18 times
Re: Changing Sketch offset causes Revolve to Disappear
Things are here even worse: On a full recompute the first revolve disappears as well.
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.27078 (Git)
Build type: Release
Python version: 3.9.9
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: C/Default (C)
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.27078 (Git)
Build type: Release
Python version: 3.9.9
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: C/Default (C)
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Changing Sketch offset causes Revolve to Disappear
It is a coplanar issue: make the width of the halfmoons a tiny bit wider and both revolves succeed:
- Attachments
-
- Clevis_Shackle_cb.FCStd
- (198.42 KiB) Downloaded 16 times
-
- SnipScreenshot-e2e7e2.png (35.28 KiB) Viewed 1037 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- Shalmeneser
- Veteran
- Posts: 9558
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Changing Sketch offset causes Revolve to Disappear
+1
You should :
* symmetry the revolution
* pocket at the last moment (symmetry through all)
Last edited by Shalmeneser on Fri Jan 28, 2022 7:28 pm, edited 1 time in total.
-
- Posts: 339
- Joined: Mon Aug 02, 2021 6:29 am
- Location: California, USA
Re: Changing Sketch offset causes Revolve to Disappear
Yep, I had tried both of those suggestions as possible options while I was trying to get this to work and stuff just kept disappearing so I kept looking for ways to make it work in harder ways. It was driving me nuts as I couldn't figure out why it was behaving that way when I thought I was doing it properly. Since I'm just a novice at this, I always assume it is something I am doing wrong.Shalmeneser wrote: ↑Fri Jan 28, 2022 9:48 am+1
You should :
* symmetry the revolution
* pocket at the last moment (symmetry trough all)
Thanks for the suggestions.