Make a chamfer on each side of a threaded hole
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 136
- Joined: Fri Aug 13, 2021 10:08 am
Make a chamfer on each side of a threaded hole
Hi
Is there anyway I can make a chamfer on each side of a throughall threaded Hole ?
Thanks
Is there anyway I can make a chamfer on each side of a throughall threaded Hole ?
Thanks
- Attachments
-
- chanfrein.PNG (29.8 KiB) Viewed 1063 times
- Shalmeneser
- Veteran
- Posts: 9558
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Make a chamfer on each side of a threaded hole
- Attachments
-
- ChampFrein_SHALM.FCStd
- (82.34 KiB) Downloaded 18 times
-
- Capture d’écran 2022-02-05 115027.png (36.99 KiB) Viewed 1031 times
-
- Posts: 136
- Joined: Fri Aug 13, 2021 10:08 am
Re: Make a chamfer on each side of a threaded hole
hehe... was hoping something more... automagic
Re: Make a chamfer on each side of a threaded hole
Seems you are using Linkstage3 and @Shalmeneser is in master.
Shouldn't make a difference in this case, just noting the difference.
Did you try the chamfer tool? Might work.
Shouldn't make a difference in this case, just noting the difference.
Did you try the chamfer tool? Might work.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Make a chamfer on each side of a threaded hole
At least on one side you could use a countersink.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 136
- Joined: Fri Aug 13, 2021 10:08 am
Re: Make a chamfer on each side of a threaded hole
Yes I did.
And made a chamfer (sketch based) on the other side by referencing the hole's countersink values
And made a chamfer (sketch based) on the other side by referencing the hole's countersink values
- Shalmeneser
- Veteran
- Posts: 9558
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
-
- Posts: 136
- Joined: Fri Aug 13, 2021 10:08 am
Re: Make a chamfer on each side of a threaded hole
Removed thread modeling to reduce file size
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2022.111.28429 (Git)
Build type: Release
Branch: LinkStage3
Hash: ec814c42d02f15171f9dbb7f650400c9943abfe0
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: French/France (fr_FR)
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2022.111.28429 (Git)
Build type: Release
Branch: LinkStage3
Hash: ec814c42d02f15171f9dbb7f650400c9943abfe0
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: French/France (fr_FR)
- Attachments
-
- écrou barillet 1∕2 13UNCx1×2.1∕2.FCStd
- (115.53 KiB) Downloaded 16 times
- Shalmeneser
- Veteran
- Posts: 9558
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Make a chamfer on each side of a threaded hole
* The angle 41° is at the wrong place.
* (I would do the hole without chamfer and all the chamfers in the same sketch.)
* (I would do the hole without chamfer and all the chamfers in the same sketch.)
- Attachments
-
- Capture d’écran 2022-02-05 132646.png (19.34 KiB) Viewed 892 times
Re: Make a chamfer on each side of a threaded hole
Hello,
I have the same problem. A easier way to create a sink on both sides of a hole would be great. It is a bit extensive to do so with FreeCAD 0.20.1.
Here is my part. It's a real part, which can be bought. The file is too large, so I uploaded it on DropBox.
https://www.dropbox.com/s/3cir1ixq5w44hxf/MW.FCStd?dl=0
I have the same problem. A easier way to create a sink on both sides of a hole would be great. It is a bit extensive to do so with FreeCAD 0.20.1.
Here is my part. It's a real part, which can be bought. The file is too large, so I uploaded it on DropBox.
https://www.dropbox.com/s/3cir1ixq5w44hxf/MW.FCStd?dl=0
Code: Select all
OS: Ubuntu 20.04.5 LTS (ubuntu:GNOME/ubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 0.20.1)
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.10.5, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.2
Locale: English/United States (en_US)
Installed mods:
* Curves 0.6.1
* sheetmetal 0.2.57
* Manipulator 1.4.9
* fasteners 0.4.23