TechDraw - dimension the center of a hole / Bohrungsmitte bemaßen

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
schwabmario
Posts: 2
Joined: Wed May 18, 2022 7:55 am

TechDraw - dimension the center of a hole / Bohrungsmitte bemaßen

Post by schwabmario »

Hello guys,

I have created a simple body with a hole in PartDesign and now I want to dimension it in TechDraw. Unfortunately, I am not able to create a length measurement from the outer edge to the center of the hole. I can only set the dimension up to the hole wall(s). Does anyone have an idea how this works?

Thanks for help!

--------------------------------------------------------------------------------------------------------

Hallo Leute,

Ich habe in PartDesign einen einfachen Körper mit einer Bohrung erstellt und möchte ihn nun in TechDraw bemaßen. Leider ist es mir nicht möglich, ein Längenmaß von der Außenkante bis zur Mitte der Bohrung zu erzeugen. Ich kann das Maß nur bis zur Bohrungswand setzen aber nicht zum Mittelpunkt. Hat jemand eine Idee, wie das funktioniert?

Danke für die Hilfe!
Attachments
Bildschirmfoto 2022-05-18 um 10.02.30.png
Bildschirmfoto 2022-05-18 um 10.02.30.png (246.36 KiB) Viewed 490 times
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: TechDraw - dimension the center of a hole / Bohrungsmitte bemaßen

Post by chrisb »

Set in the view ArcCenterMarks=true.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
schwabmario
Posts: 2
Joined: Wed May 18, 2022 7:55 am

Re: TechDraw - dimension the center of a hole / Bohrungsmitte bemaßen

Post by schwabmario »

Thank you, it works.
User avatar
M4x
Veteran
Posts: 1474
Joined: Sat Mar 11, 2017 9:23 am
Location: Germany

Re: TechDraw - dimension the center of a hole / Bohrungsmitte bemaßen

Post by M4x »

The wiki is always a great place to start when looking for information: TechDraw_View#View
Post Reply