The sweep has so called self intersections: If you see the sweep as a sequence of sections, then these sections must not intersect.
Help creating a box with curved edges
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Help creating a box with curved edges
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Help creating a box with curved edges
Yes, we are tuned to see the attached file always at the end.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Help creating a box with curved edges
1. Extrude the Path-Sketch and "SliceApart" (Part-WB) the 2 ObjectsThis is the profile I want to achieve
2. Sweep only the Base-Part, fetch the Profile-Sketch of the Sweep and revolve it (have to adjust Base- and Side-Profiles)
3. Sweep only the Base-Part and model the Corner with the Curves- and Surface-WB
4. ...
- Attachments
-
- trial1_03 SweepBase+ModelCornerSurface.FCStd
- (161.87 KiB) Downloaded 16 times
-
- trial1_02 SweepBase+RevolveCorner.FCStd
- (124.08 KiB) Downloaded 15 times
-
- trial1_01 SliceApart.FCStd
- (128.3 KiB) Downloaded 14 times
- papyblaise
- Veteran
- Posts: 7870
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Help creating a box with curved edges
It's not exactly the shape requested, but for a bowl for the cat, it will be fine.
- Attachments
-
- ecuelle pour le chat.FCStd
- (248.89 KiB) Downloaded 16 times
-
- ecuelle pour le chat.JPG (30.32 KiB) Viewed 327 times
Re: Help creating a box with curved edges
Maybe this will help. Since the tray is flat this could be done in one additive sweep sketch.
- Attachments
-
- tray1.FCStd
- (377.72 KiB) Downloaded 14 times
-
- tray_pic.png (278.7 KiB) Viewed 314 times
Last edited by freedman on Fri May 27, 2022 4:42 pm, edited 2 times in total.
- thomas-neemann
- Veteran
- Posts: 11801
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Help creating a box with curved edges
here is another suggestion, can also shoot a video about it
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2022.430.26244 +4758 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: b024b876480a533018fdc702145e9e38f8c54ba6
Python version: 3.9.12
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2022.430.26244 +4758 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: b024b876480a533018fdc702145e9e38f8c54ba6
Python version: 3.9.12
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)