How to make a 3d model of a lattice for a vegetable cutter?

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
MaximOleynik
Posts: 29
Joined: Sun Mar 27, 2022 5:52 am

How to make a 3d model of a lattice for a vegetable cutter?

Post by MaximOleynik »

Hello!
I have the part that squeezes vegetables through the lattice. It is necessary for this part to make a 3D model of the lattice (vegetable cutter cleaning net). How to do it in the easiest way?
Attachments
2022-05-26 22-35-15.JPG
2022-05-26 22-35-15.JPG (294.42 KiB) Viewed 885 times
4067cdd6d0cd5fbca4bf0ce3c288cdf1.jpeg
4067cdd6d0cd5fbca4bf0ce3c288cdf1.jpeg (34.35 KiB) Viewed 885 times
основа1.jpg
основа1.jpg (94.03 KiB) Viewed 885 times
edwilliams16
Veteran
Posts: 3108
Joined: Thu Sep 24, 2020 10:31 pm
Location: Hawaii
Contact:

Re: How to make a 3d model of a lattice for a vegetable cutter?

Post by edwilliams16 »

Linear Arrays to make the slots. I put the parameters in a Dynamic Data object. It's a Macro you'll need to get.
Filleting all the edges would be possible but slow.
Screen Shot 2022-05-26 at 6.56.37 PM.png
Screen Shot 2022-05-26 at 6.56.37 PM.png (61.25 KiB) Viewed 842 times
Attachments
vegcutter.FCStd
(324.86 KiB) Downloaded 12 times
freedman
Veteran
Posts: 3441
Joined: Thu Mar 22, 2018 3:02 am
Location: Washington State, USA

Re: How to make a 3d model of a lattice for a vegetable cutter?

Post by freedman »

Depending how much detail work you need around the edges this could be done in Sketcher using the sketch array tool. This would give you options to modify each block if needed.
edwilliams16
Veteran
Posts: 3108
Joined: Thu Sep 24, 2020 10:31 pm
Location: Hawaii
Contact:

Re: How to make a 3d model of a lattice for a vegetable cutter?

Post by edwilliams16 »

It's more flexible to model the teeth with a pad, rather than cutting slots between them if you want to modify them. Here I've filleted the sides of the teeth and tapered them, making the tool easier to align.
Screen Shot 2022-05-27 at 11.03.30 AM.png
Screen Shot 2022-05-27 at 11.03.30 AM.png (84.42 KiB) Viewed 711 times
Attachments
vegcutter2.FCStd
(390.1 KiB) Downloaded 14 times
User avatar
Shalmeneser
Veteran
Posts: 9475
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: How to make a 3d model of a lattice for a vegetable cutter?

Post by Shalmeneser »

:idea:
Attachments
Capture d’écran 2022-05-28 112630.jpg
Capture d’écran 2022-05-28 112630.jpg (113.57 KiB) Viewed 629 times
VegCut_SHALM.FCStd
(142.63 KiB) Downloaded 11 times
MaximOleynik
Posts: 29
Joined: Sun Mar 27, 2022 5:52 am

Re: How to make a 3d model of a lattice for a vegetable cutter?

Post by MaximOleynik »

Thank you all!
Post Reply