Hi,
When I click on pocket I see the object. When I click on lug, I also see the object. However, I cannot see them both - the lug should be in the pocket's object.
What am I doing wrong?
TIA
Unable to view object
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Unable to view object
- Attachments
-
- 1.png (77.65 KiB) Viewed 513 times
-
- 1.png (77.65 KiB) Viewed 513 times
- Shalmeneser
- Veteran
- Posts: 9474
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Unable to view object
File ? Version (link in the red banner) ?
Re: Unable to view object
This looks as if the last pad is not connected to the rest. As this violates the single solid rule, one of the two solids is discarded.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Unable to view object
Ok, I just cannot get the screw support at the box's corners. Here's the code:
https://ebolisa.net/images/box_parametric.zip
https://ebolisa.net/images/box_parametric.zip
Re: Unable to view object
Please attach such files directly as FCStd file here without the backup.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Unable to view object
Your file doesn't include the the final pad. If I add it, I see the same issue as you do. As a first workaround you can use for the Pad the Type=TwoLengths, with a tiny second length of e.g. 0.1mm.
I will investigate this further.
I will investigate this further.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Unable to view object
The problem was your invalid sketch (here already fixed):
BTW: repeated dimensions always have a bad smell. Better replace all but one with geometric constraints (may need additional construction geometry).
The inner circle must not touch the outer borders.BTW: repeated dimensions always have a bad smell. Better replace all but one with geometric constraints (may need additional construction geometry).
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.