Sheetmetal unfold incorrectly

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
Fritz
Posts: 21
Joined: Mon Oct 29, 2018 5:33 pm

Sheetmetal unfold incorrectly

Post by Fritz »

Good Morning Forum,

please help with this project - when I unfold this 1 mm thick Sheetmetal, it unfolds but is missing the side end bends of 10 mm.

I have unfolded it from top and bottom view, with the same results.


OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.29177 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: 68e337670e227889217652ddac593c93b5e8dc94
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.2
Locale: English/South Africa (en_ZA)

Regards
Fritz Schnelle
South Africa
Attachments
Potato Griller.FCStd
(309.41 KiB) Downloaded 15 times
User avatar
papyblaise
Veteran
Posts: 7870
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: Sheetmetal unfold incorrectly

Post by papyblaise »

it's very annoying: I can't unfold a 60° angle either
I finally got my first bug since I've been on this forum :oops:
User avatar
Shalmeneser
Veteran
Posts: 9474
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: Sheetmetal unfold incorrectly

Post by Shalmeneser »

True, there is a problem before the 1st pocket if you want to unfold.
You should bend multiple 'faces' with the same feature.
Attachments
Annotation 2022-12-09 111758.jpg
Annotation 2022-12-09 111758.jpg (64.77 KiB) Viewed 557 times
Potato Griller_SHALM.FCStd
(438.65 KiB) Downloaded 11 times
User avatar
papyblaise
Veteran
Posts: 7870
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: Sheetmetal unfold incorrectly

Post by papyblaise »

je dirai même plus
I don't like to stay on a failure, redoing it in another flow, it works
Attachments
grille patates.FCStd
(254.25 KiB) Downloaded 13 times
grille patates.JPG
grille patates.JPG (42.64 KiB) Viewed 510 times
Fritz
Posts: 21
Joined: Mon Oct 29, 2018 5:33 pm

Re: Sheetmetal unfold incorrectly

Post by Fritz »

Good Morning,
thanks for the suggestions, I have used them and it has worked successfully.

Regards
Fritz Schnelle
Post Reply