Good Morning Forum,
please help with this project - when I unfold this 1 mm thick Sheetmetal, it unfolds but is missing the side end bends of 10 mm.
I have unfolded it from top and bottom view, with the same results.
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.29177 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: 68e337670e227889217652ddac593c93b5e8dc94
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.2
Locale: English/South Africa (en_ZA)
Regards
Fritz Schnelle
South Africa
Sheetmetal unfold incorrectly
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Sheetmetal unfold incorrectly
- Attachments
-
- Potato Griller.FCStd
- (309.41 KiB) Downloaded 15 times
- papyblaise
- Veteran
- Posts: 8016
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Sheetmetal unfold incorrectly
it's very annoying: I can't unfold a 60° angle either
I finally got my first bug since I've been on this forum
I finally got my first bug since I've been on this forum
- Shalmeneser
- Veteran
- Posts: 9593
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Sheetmetal unfold incorrectly
True, there is a problem before the 1st pocket if you want to unfold.
You should bend multiple 'faces' with the same feature.
You should bend multiple 'faces' with the same feature.
- Attachments
-
- Annotation 2022-12-09 111758.jpg (64.77 KiB) Viewed 567 times
-
- Potato Griller_SHALM.FCStd
- (438.65 KiB) Downloaded 12 times
- papyblaise
- Veteran
- Posts: 8016
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Sheetmetal unfold incorrectly
je dirai même plus
I don't like to stay on a failure, redoing it in another flow, it works
I don't like to stay on a failure, redoing it in another flow, it works
- Attachments
-
- grille patates.FCStd
- (254.25 KiB) Downloaded 13 times
-
- grille patates.JPG (42.64 KiB) Viewed 520 times
Re: Sheetmetal unfold incorrectly
Good Morning,
thanks for the suggestions, I have used them and it has worked successfully.
Regards
Fritz Schnelle
thanks for the suggestions, I have used them and it has worked successfully.
Regards
Fritz Schnelle