small project

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Jayro
Posts: 3
Joined: Sat Sep 21, 2019 1:54 am

small project

Postby Jayro » Sat Sep 21, 2019 2:12 am

Hey all, I'm VERY new to this whole 3d printing and CAD side of things having just purchased my 1st 3d printer. I have been playing around printing a few basic designs to get familiar with the printer etc. I have a small/basic item I have drawn up (not cad drawing) and I'm not yet able to produce the CAD drawing I'm trying to so I was wondering if this is something that a person like me can pay someone to convert my "drawing" into a STL file and if so is there a going rate for this service or?

Cheers
JAYRO
victor.cis
Posts: 10
Joined: Thu Apr 20, 2017 11:11 am

Re: small project

Postby victor.cis » Sat Sep 21, 2019 5:31 am

Hi,

PM Sent.

Victor
czinehuba
Posts: 4
Joined: Mon Oct 15, 2018 4:59 am
Location: UK

Re: small project

Postby czinehuba » Sat Sep 21, 2019 5:47 am

Hi

PM sent.

Huba
frank 123
Posts: 2
Joined: Sat Sep 21, 2019 11:08 am

Re: small project

Postby frank 123 » Sat Sep 21, 2019 11:11 am

Hi,

I understand your requirement and will be glad to assist you as i have done similar work before.

please connect me over Skype cis.am3 or email me at frank1 AT talentsfromindia dot com

Regards
Frank
Linneajones
Posts: 1
Joined: Sat Sep 07, 2019 2:21 pm

Re: small project

Postby Linneajones » Mon Sep 23, 2019 8:19 am

Hello There
Greetings

This task can be positively achieved.
Please contact me on Skype live:linneajones.

Looking forward to connecting with you.

Regards
Linnea