Transcribe part from Onshape to Freecad + video

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
dublya
Posts: 8
Joined: Wed Jan 30, 2019 5:43 pm

Transcribe part from Onshape to Freecad + video

Postby dublya » Fri May 21, 2021 2:28 pm

Hi everyone,

I have 3 parts that a friend designed for me in onshape. I'd like someone to redraw them in freecad and make a video talking through the process.

Going forward I will be iterating on the parts, so there would be some more work then.

Here's the model: https://cad.onshape.com/documents/92a2e ... 0bf10aca02

I'd prefer to pay for the job rather than the time, but open to however you like to work.

Happy to answer any questions, though I am not familiar with onshape. I like working in freecad, but its been a few years, and I am quite rusty.

REVISION 5/23:

Based on some good questions in pm, I wanted to provide an example file to show how I build models and how I like this one built.. unless you have a better way. In short I only use 3 workbenches: Part Design, Sketcher, and Spreadsheet. I put all my dimensions in spreadsheet.

The example file is a simple model of an ikea flashlight with a simple suction cup mount:
https://mega.nz/file/TOR1FYJB#Aday7uu5r ... GfgMTkr8PU

I thought I had a good example of a screencast of how to build a model from scratch, but I can't find one. So I may make one as an example.
Last edited by dublya on Sun May 23, 2021 9:08 pm, edited 2 times in total.
adrianinsaval
Posts: 439
Joined: Thu Apr 05, 2018 5:15 pm

Re: Transcribe part from Onshape to Freecad + video

Postby adrianinsaval » Fri May 21, 2021 3:17 pm

I'm interested and have sent you a pm
dublya
Posts: 8
Joined: Wed Jan 30, 2019 5:43 pm

Re: Transcribe part from Onshape to Freecad + video

Postby dublya » Fri May 21, 2021 6:54 pm

adrianinsaval wrote: Fri May 21, 2021 3:17 pm I'm interested and have sent you a pm
thanks!